Honeywell K9696V2 Audio for Operators, At View Operator’s PC, To send and receive audio offsite

Audio

4.2Audio for Operators

At View Operator’s PC

When listening, sound sources are mixed at a View operator’s station, regardless of the number of sites being monitored at once. Each Rapid Eye site can send two channels of audio to a View operator.

!45 To send and receive audio offsite

1.Install a sound card on the View operator’s PC.

2.Connect a microphone to the PC’s sound card.

3.Connect a powered speaker to the PC’s sound card.

Fig. 39. Audio tab, set to deliver sound to and from the View operator’s PC to two channels of audio, at one Multi site.

The Audio tab is unavailable on PCs without a soundcard.

!46 To monitor and record

You can monitor, record or do both, for each channel.

1.Click the Enable boxes to enable transmission of sound from point to point and monitor it.

2.Click the Record box to record sound along with the video from the site.

!47 To enable “talking to” a site

•Click the monitor Talk boxes, as needed for each channel; see fig. 39. An operator can broadcast on either or both channels, and to as many sites at once as can be opened, that have audio.

Loud alarms can interfere with microphones or a speaker at times when they could be needed most.

Onsite Audio, Using LocalView

Local View can be used to test or permanently monitor audio onsite.

4–3