Honeywell 6271V manual System Overview contd

Page 12

System Overview (cont'd)

Note that this is a limited mode of operation. While in this mode:

•You can use the Security button to access the Console Emulation Mode of operation to try to clear your faults, disarm the system, or enter additional Alpha Keypad commands specified in you panel User Guide. You can perform almost all functions that you can perform from a standard non-graphic alpha keypad.

•You can depress the “Panic” key and generate Emergency Messages as defined in the panels home partition for this TouchCenter.

•The Armed and Ready LEDs on the front of the TouchCenter will indicate the TouchCenter’s home partition status. The Message LED is not active in the Safe Mode.

•The Chime mode will function in the Safe Mode: however, you will not have Voice, Voice Chime, or Message capability.

•When in Safe Mode, the lock on the Security button on the Home screen will always be shown in the unlocked position. Refer to the Armed LED for the true armed status of your system.

•When an alarm occurs in the Safe Mode, it is displayed on the Console mode screen only. It will not be shown on the Home screen.

To Exit the Safe Mode:

1.Press the ! SAFE MODE ! bar. You will be presented with the following popup message:

2.Select “Yes” to return to the Normal Mode of operation. The TouchCenter will reset and normal operation will return as long as the original conditions that caused the entry into Safe Mode do not still exist.

12

Image 12

Contents Ademco Table of Contents Table of Contents Contd About the TouchCenter IntroductionTouchCenter Interface About the TouchCenter Contd Navigating through the TouchCenterAbout Your Home Screen Navigation Icon Descriptions Icon Location FunctionTouchCenter Arming Screen AwayStay Night MoreChoices Icon MeaningSystem Overview Introduction to Your SystemBurglary Protection System Overview contd Fire ProtectionSafe Mode User CodesExtended Functionality System Overview contd How to Arm the System Features for Each Arming ModeArming Exit Entry Perimeter Interior Mode Delay Armed Security System OperationSecurity System Operation contd Screen ActionHow to Arm Multiple Partitions To arm multiple partitionsSelected How to Display Faults Bypass Zones, Enter CodeSecurity System Operation Contd How to Bypass Zones To bypass zones do the followingPress the Bypass Selected BypassPress the Back button to return to the Arming screen How to Remove Bypassed Zones Security System Operation contd How to Disarm the System To disarm the system when entering the premisesTo disarm the system when already in the premises Security System Operation Contd How to Check the Status of Other Partitions Security System Operation Contd How to Send Emergency Messages How to View the Event Log When All Partitions or All Events Next and Previous buttons willNext and Previous buttons Fire Alarm System Operation Introduction to Fire Alarm System OperationCase of Fire Alarm Silencing and Clearing a Fire AlarmFire Alarm System Operation contd User Code Setup Introduction to User Code SetupAuthority Levels User Code Setup contd How to Access User SetupAccess User Setup as follows How to Add a User Add a user as followsEnter User Code… displayed DigitsUser Code Setup Contd Selected, the Allow Arm/Disarm fromUser Code Setup contd How to Delete a User Delete a User as followsAuthorized Code How to Edit a User Edit a user as followsInstructions Enter Authorized Code User Code Setup Contd Advanced System Features Introduction to Advanced System FeaturesConsole Emulation Mode How to Enter Console Emulation ModeAdvanced System Features Contd Voice Messages Introduction to Recording and Retrieving MessagesVoice Messages Contd Recording a Voice MessageTo record a voice message, do the following Retrieving and Deleting a Voice Message To retrieve a voice message, do the followingSummary TouchCenter LED Operation TouchCenter LED OperationLED Description TouchCenter Setup How to Access TouchCenter Setup OptionsHow to Access Setup Access the Setup features as followsTouchCenter Setup Contd How to Adjust the Touch Screen Contrast You may adjust the touch screen contrast as followsHow to Adjust the Volume How to Select Screen Backlight Off Activation Time Backlight Off After arrow button. aTouchCenter Setup Contd Button. a Settings Changed! pop-upHow to Select Homepage After Time TouchCenter Setup Contd How to Set the Time and Date TouchCenter Setup Contd Enter 2 digits for the hour TouchCenter Setup Contd How to Access Operating Modes Access the Operating Modes feature as followsTouchCenter Operating Modes Operating Modes Chime, Voice, and Voice ChimeTouchCenter Operating Modes Contd Press the Operating ModesHow to Clean your TouchCenter Clean the TouchCenter as followsMaintaining Your System Maintaining Your System Contd Routine CareGlossary Glossary Contd Page Page Page Page Page Page ONE Year Limited Warranty