Honeywell 6271V manual How to Disarm the System, To disarm the system when entering the premises

Page 23

Security System Operation (Cont'd)

How to Disarm the System

IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. If you return after an alarm has occurred and the main sounder has shut itself off, the TouchCenter will beep rapidly upon entering, indicating that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

The system may be disarmed using either of two methods. One method is employed when you enter the premises and the other is when you have been in the premises with the system armed (i.e., Stay and Night arming modes).

To disarm the system when entering the premises:

The TouchCenter will automatically display the Entry Delay Active screen when you enter the premises:

Enter your Code. The partition will be disarmed and the "Arming" screen is displayed showing the system as Ready to Arm.

Note: If you have a commercial system and a time window has been defined for when you may disarm the system, the system will not disarm if you are outside that time window.

23

Image 23

Contents Ademco Table of Contents Table of Contents Contd TouchCenter Interface About the TouchCenterIntroduction About Your Home Screen About the TouchCenter ContdNavigating through the TouchCenter Icon Location Function Navigation Icon DescriptionsStay TouchCenter Arming ScreenAway Icon Meaning NightMore ChoicesBurglary Protection System OverviewIntroduction to Your System Fire Protection System Overview contdExtended Functionality Safe ModeUser Codes System Overview contd Security System Operation How to Arm the SystemFeatures for Each Arming Mode Arming Exit Entry Perimeter Interior Mode Delay ArmedScreen Action Security System Operation contdSelected How to Arm Multiple PartitionsTo arm multiple partitions Bypass Zones, Enter Code How to Display FaultsSecurity System Operation Contd To bypass zones do the following How to Bypass ZonesBypass Press the Bypass SelectedPress the Back button to return to the Arming screen How to Remove Bypassed Zones Security System Operation contd To disarm the system when entering the premises How to Disarm the SystemTo disarm the system when already in the premises Security System Operation Contd How to Check the Status of Other Partitions Security System Operation Contd How to Send Emergency Messages How to View the Event Log Next and Previous buttons When All Partitions or All EventsNext and Previous buttons will Silencing and Clearing a Fire Alarm Fire Alarm System OperationIntroduction to Fire Alarm System Operation Case of Fire AlarmFire Alarm System Operation contd Authority Levels User Code SetupIntroduction to User Code Setup Access User Setup as follows User Code Setup contdHow to Access User Setup Add a user as follows How to Add a UserDigits Enter User Code… displayedSelected, the Allow Arm/Disarm from User Code Setup ContdUser Code Setup contd Authorized Code How to Delete a UserDelete a User as follows Instructions Enter Authorized Code How to Edit a UserEdit a user as follows User Code Setup Contd How to Enter Console Emulation Mode Advanced System FeaturesIntroduction to Advanced System Features Console Emulation ModeAdvanced System Features Contd Introduction to Recording and Retrieving Messages Voice MessagesTo record a voice message, do the following Voice Messages ContdRecording a Voice Message To retrieve a voice message, do the following Retrieving and Deleting a Voice MessageLED Description Summary TouchCenter LED OperationTouchCenter LED Operation Access the Setup features as follows TouchCenter SetupHow to Access TouchCenter Setup Options How to Access SetupTouchCenter Setup Contd You may adjust the touch screen contrast as follows How to Adjust the Touch Screen ContrastHow to Adjust the Volume Backlight Off After arrow button. a How to Select Screen Backlight Off Activation TimeButton. a Settings Changed! pop-up TouchCenter Setup ContdHow to Select Homepage After Time TouchCenter Setup Contd How to Set the Time and Date TouchCenter Setup Contd Enter 2 digits for the hour TouchCenter Setup Contd Operating Modes Chime, Voice, and Voice Chime How to Access Operating ModesAccess the Operating Modes feature as follows TouchCenter Operating ModesPress the Operating Modes TouchCenter Operating Modes ContdMaintaining Your System How to Clean your TouchCenterClean the TouchCenter as follows Routine Care Maintaining Your System ContdGlossary Glossary Contd Page Page Page Page Page Page ONE Year Limited Warranty