Honeywell 6271V manual TouchCenter Arming Screen, Away, Stay

Page 7

About the TouchCenter (Cont'd)

TouchCenter "Arming" Screen

From the "Home" screen, press SECURITY to access the TouchCenter "Arming" screen. Use this picture and the table that follows to become familiar with the TouchCenter security functions.

Note: The Voice Status () button causes the TouchCenter to announce system status if depressed at least 10 seconds following its last depression. Note that Voice must be enabled for this button to function correctly during an alarm condition.

ITEM	FUNCTION

AWAY	Press this button to arm when no one will be staying on the
	premises. When armed in AWAY, the system will sound an
	alarm if a protected door or window is opened, or if any
	movement is detected inside the premises. You may leave
	through the entrance door during the exit delay period without
	causing an alarm. You may also re-enter through the entrance
	door, but must disarm the system with your User Code within the
	entry delay period or an alarm will occur.

STAY	Press this button to arm when you are staying home, but might
	expect someone to use the entrance door later.
	When armed in STAY, the system will sound an alarm if a
	protected door or window is opened, but you may otherwise
	move freely throughout the premises. Late arrivals can enter
	through the entrance door without causing an alarm, but they
	must disarm the system within the entry delay period or an alarm
	will occur.
	Note: On some residential systems, if you press the Voice
	Status Icon while armed in the Stay Mode, the exit delay time will
	restart (if the feature was enabled by your installer).

7

Image 7

Contents Ademco Table of Contents Table of Contents Contd Introduction About the TouchCenterTouchCenter Interface Navigating through the TouchCenter About the TouchCenter ContdAbout Your Home Screen Icon Location Function Navigation Icon DescriptionsAway TouchCenter Arming ScreenStay Icon Meaning NightMore ChoicesIntroduction to Your System System OverviewBurglary Protection Fire Protection System Overview contdUser Codes Safe ModeExtended Functionality System Overview contd Security System Operation How to Arm the SystemFeatures for Each Arming Mode Arming Exit Entry Perimeter Interior Mode Delay ArmedScreen Action Security System Operation contdTo arm multiple partitions How to Arm Multiple PartitionsSelected Bypass Zones, Enter Code How to Display FaultsSecurity System Operation Contd To bypass zones do the following How to Bypass ZonesBypass Press the Bypass SelectedPress the Back button to return to the Arming screen How to Remove Bypassed Zones Security System Operation contd To disarm the system when entering the premises How to Disarm the SystemTo disarm the system when already in the premises Security System Operation Contd How to Check the Status of Other Partitions Security System Operation Contd How to Send Emergency Messages How to View the Event Log Next and Previous buttons will When All Partitions or All EventsNext and Previous buttons Silencing and Clearing a Fire Alarm Fire Alarm System OperationIntroduction to Fire Alarm System Operation Case of Fire AlarmFire Alarm System Operation contd Introduction to User Code Setup User Code SetupAuthority Levels How to Access User Setup User Code Setup contdAccess User Setup as follows Add a user as follows How to Add a UserDigits Enter User Code… displayedSelected, the Allow Arm/Disarm from User Code Setup ContdUser Code Setup contd Delete a User as follows How to Delete a UserAuthorized Code Edit a user as follows How to Edit a UserInstructions Enter Authorized Code User Code Setup Contd How to Enter Console Emulation Mode Advanced System FeaturesIntroduction to Advanced System Features Console Emulation ModeAdvanced System Features Contd Introduction to Recording and Retrieving Messages Voice MessagesRecording a Voice Message Voice Messages ContdTo record a voice message, do the following To retrieve a voice message, do the following Retrieving and Deleting a Voice MessageTouchCenter LED Operation Summary TouchCenter LED OperationLED Description Access the Setup features as follows TouchCenter SetupHow to Access TouchCenter Setup Options How to Access SetupTouchCenter Setup Contd You may adjust the touch screen contrast as follows How to Adjust the Touch Screen ContrastHow to Adjust the Volume Backlight Off After arrow button. a How to Select Screen Backlight Off Activation TimeButton. a Settings Changed! pop-up TouchCenter Setup ContdHow to Select Homepage After Time TouchCenter Setup Contd How to Set the Time and Date TouchCenter Setup Contd Enter 2 digits for the hour TouchCenter Setup Contd Operating Modes Chime, Voice, and Voice Chime How to Access Operating ModesAccess the Operating Modes feature as follows TouchCenter Operating ModesPress the Operating Modes TouchCenter Operating Modes ContdClean the TouchCenter as follows How to Clean your TouchCenterMaintaining Your System Routine Care Maintaining Your System ContdGlossary Glossary Contd Page Page Page Page Page Page ONE Year Limited Warranty