
Security System Operation (cont'd)
How to Bypass Zones
The Bypass function is used when you want to arm your system with one or more zones left open. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed.
•Residential systems will not allow you to bypass fire or emergency zones. On commercial systems, a specified user may be allowed to bypass fire and system zones if the user was enabled by your system installer.
•To bypass zones, the system must be disarmed first.
•Limits apply as to how many zones can be bypassed at one time. These limits are ten zones on residential systems and five zones on commercial systems.
To bypass zones do the following:
1.From the "Home" screen, press the SECURITY button. The "Arming" screen is displayed.
SCREEN | ACTION |
|
|
| 2. From the "Arming" screen, press the |
| MORE CHOICES button. The "More |
| Choices" screen is displayed. |
| Note: If any zones are bypassed or |
| faulted, a Display Faults button will also |
| be displayed on this screen. |
|
|
| 3. Press the SHOW ZONES button on |
| the "More Choices" screen. |
| While the TouchCenter is requesting and |
| receiving the zone data from the control |
| panel, the screen displays "Please Wait!". |
| Then the zones, along with their current |
| status, are displayed. |
|
|
18