Honeywell 6271V manual How to Display Faults, Bypass Zones, Enter Code

Page 16

Security System Operation (cont'd)

How to Display Faults

The Display Faults function is used when you see a Not Ready Fault message and want to determine were the fault is and what type of fault it is.

To display faults do the following:

1.From the "Home" screen, press the SECURITY button. The "Arming" screen is displayed.

SCREEN	ACTION

	2. From the "Arming" screen, press the
	DISPLAY FAULTS button. The "Display
	Faults" screen is displayed showing a
	listing of faulted and/or bypassed zones.
	The following symbols may be displayed
	on the "Display Faults" screen.
	Zone in alarm
	Zone has trouble
	Zone is faulted
	Zone has low battery
	Zone is bypassed

	3. As applicable, take corrective action
	such as closing a window or door to
	correct the fault. If the fault cannot be
	corrected, you may chose to bypass a
	zone by touching the zone to select it and
	depressing the BYPASS SELECTED
	button or bypass all faulted zones by
	depressing the BYPASS ALL button.
	The "User Authorization" screen is
	displayed with the instructions "To
	Bypass Zones, Enter Code".

•Residential systems will not allow you to bypass fire or emergency zones. On commercial systems, a specified user may be allowed to bypass fire and system zones if the user was enabled by your system installer.

•To bypass zones the system must be disarmed first.

•Limits apply as to how many zones can be bypassed at one time. These limits are ten zones on residential and five zones on commercial systems.

16

Image 16

Contents Ademco Table of Contents Table of Contents Contd Introduction About the TouchCenterTouchCenter Interface Navigating through the TouchCenter About the TouchCenter ContdAbout Your Home Screen Navigation Icon Descriptions Icon Location FunctionAway TouchCenter Arming ScreenStay Night MoreChoices Icon MeaningIntroduction to Your System System OverviewBurglary Protection System Overview contd Fire ProtectionUser Codes Safe ModeExtended Functionality System Overview contd How to Arm the System Features for Each Arming ModeArming Exit Entry Perimeter Interior Mode Delay Armed Security System OperationSecurity System Operation contd Screen ActionTo arm multiple partitions How to Arm Multiple PartitionsSelected How to Display Faults Bypass Zones, Enter CodeSecurity System Operation Contd How to Bypass Zones To bypass zones do the followingPress the Bypass Selected BypassPress the Back button to return to the Arming screen How to Remove Bypassed Zones Security System Operation contd How to Disarm the System To disarm the system when entering the premisesTo disarm the system when already in the premises Security System Operation Contd How to Check the Status of Other Partitions Security System Operation Contd How to Send Emergency Messages How to View the Event Log Next and Previous buttons will When All Partitions or All EventsNext and Previous buttons Fire Alarm System Operation Introduction to Fire Alarm System OperationCase of Fire Alarm Silencing and Clearing a Fire AlarmFire Alarm System Operation contd Introduction to User Code Setup User Code SetupAuthority Levels How to Access User Setup User Code Setup contdAccess User Setup as follows How to Add a User Add a user as followsEnter User Code… displayed DigitsUser Code Setup Contd Selected, the Allow Arm/Disarm fromUser Code Setup contd Delete a User as follows How to Delete a UserAuthorized Code Edit a user as follows How to Edit a UserInstructions Enter Authorized Code User Code Setup Contd Advanced System Features Introduction to Advanced System FeaturesConsole Emulation Mode How to Enter Console Emulation ModeAdvanced System Features Contd Voice Messages Introduction to Recording and Retrieving MessagesRecording a Voice Message Voice Messages ContdTo record a voice message, do the following Retrieving and Deleting a Voice Message To retrieve a voice message, do the followingTouchCenter LED Operation Summary TouchCenter LED OperationLED Description TouchCenter Setup How to Access TouchCenter Setup OptionsHow to Access Setup Access the Setup features as followsTouchCenter Setup Contd How to Adjust the Touch Screen Contrast You may adjust the touch screen contrast as followsHow to Adjust the Volume How to Select Screen Backlight Off Activation Time Backlight Off After arrow button. aTouchCenter Setup Contd Button. a Settings Changed! pop-upHow to Select Homepage After Time TouchCenter Setup Contd How to Set the Time and Date TouchCenter Setup Contd Enter 2 digits for the hour TouchCenter Setup Contd How to Access Operating Modes Access the Operating Modes feature as followsTouchCenter Operating Modes Operating Modes Chime, Voice, and Voice ChimeTouchCenter Operating Modes Contd Press the Operating ModesClean the TouchCenter as follows How to Clean your TouchCenterMaintaining Your System Maintaining Your System Contd Routine CareGlossary Glossary Contd Page Page Page Page Page Page ONE Year Limited Warranty