Honeywell 6271V manual Introduction to Advanced System Features, Console Emulation Mode

Page 42

Advanced System Features

Introduction to Advanced System Features

While most of the commonly used security functions are available from the TouchCenter’s advanced user interface, there are some less used, advanced features that can either be accessed through Console Emulation mode on the TouchCenter or a standard alpha keypad. To use features not supported by the TouchCenter, refer to your Control Panel User Guide.

Console Emulation Mode

Console Emulation Mode allows you to use a TouchCenter interface just as you would a regular system keypad. All commands shown in Console Emulation mode can also be executed from a standard alpha keypad.

Notes:

•It is recommended that you do not use the Console Emulation Mode to enter GOTO commands. Unsatisfactory operation may result from issuing GOTO commands in Console Emulation.

•Two button panics (1 & *, 3 & #, and * & #) do not function in the Console Emulation Mode. The A, B, C, and D buttons do function if programmed as panic keys. Check with your system installer for details.

•Commercial systems with Alpha keypads have a feature where if you depress a key for 5 seconds, you will receive self help messages about the pressed key or holding the * key for 5 seconds will provide zone descriptors. These features do not function in the TouchCenter as all key presses are instantaneous.

How to Enter Console Emulation Mode

To access the TouchCenter "Keypad," do the following:

42

Image 42

Contents Ademco Table of Contents Table of Contents Contd About the TouchCenter IntroductionTouchCenter Interface About the TouchCenter Contd Navigating through the TouchCenterAbout Your Home Screen Navigation Icon Descriptions Icon Location FunctionTouchCenter Arming Screen AwayStay Choices NightMore Icon MeaningSystem Overview Introduction to Your SystemBurglary Protection System Overview contd Fire ProtectionSafe Mode User CodesExtended Functionality System Overview contd Arming Exit Entry Perimeter Interior Mode Delay Armed How to Arm the SystemFeatures for Each Arming Mode Security System OperationSecurity System Operation contd Screen ActionHow to Arm Multiple Partitions To arm multiple partitionsSelected How to Display Faults Bypass Zones, Enter CodeSecurity System Operation Contd How to Bypass Zones To bypass zones do the followingPress the Bypass Selected BypassPress the Back button to return to the Arming screen How to Remove Bypassed Zones Security System Operation contd How to Disarm the System To disarm the system when entering the premisesTo disarm the system when already in the premises Security System Operation Contd How to Check the Status of Other Partitions Security System Operation Contd How to Send Emergency Messages How to View the Event Log When All Partitions or All Events Next and Previous buttons willNext and Previous buttons Case of Fire Alarm Fire Alarm System OperationIntroduction to Fire Alarm System Operation Silencing and Clearing a Fire AlarmFire Alarm System Operation contd User Code Setup Introduction to User Code SetupAuthority Levels User Code Setup contd How to Access User SetupAccess User Setup as follows How to Add a User Add a user as followsEnter User Code… displayed DigitsUser Code Setup Contd Selected, the Allow Arm/Disarm fromUser Code Setup contd How to Delete a User Delete a User as followsAuthorized Code How to Edit a User Edit a user as followsInstructions Enter Authorized Code User Code Setup Contd Console Emulation Mode Advanced System FeaturesIntroduction to Advanced System Features How to Enter Console Emulation ModeAdvanced System Features Contd Voice Messages Introduction to Recording and Retrieving MessagesVoice Messages Contd Recording a Voice MessageTo record a voice message, do the following Retrieving and Deleting a Voice Message To retrieve a voice message, do the followingSummary TouchCenter LED Operation TouchCenter LED OperationLED Description How to Access Setup TouchCenter SetupHow to Access TouchCenter Setup Options Access the Setup features as followsTouchCenter Setup Contd How to Adjust the Touch Screen Contrast You may adjust the touch screen contrast as followsHow to Adjust the Volume How to Select Screen Backlight Off Activation Time Backlight Off After arrow button. aTouchCenter Setup Contd Button. a Settings Changed! pop-upHow to Select Homepage After Time TouchCenter Setup Contd How to Set the Time and Date TouchCenter Setup Contd Enter 2 digits for the hour TouchCenter Setup Contd TouchCenter Operating Modes How to Access Operating ModesAccess the Operating Modes feature as follows Operating Modes Chime, Voice, and Voice ChimeTouchCenter Operating Modes Contd Press the Operating ModesHow to Clean your TouchCenter Clean the TouchCenter as followsMaintaining Your System Maintaining Your System Contd Routine CareGlossary Glossary Contd Page Page Page Page Page Page ONE Year Limited Warranty