Kicker SX900.4, SX700.4 manual Select Lock IT UP or DON’T Lock, Unlock Amplifier

Page 15

Security MENU - Here you can lock down your amplifier to prevent any access to the settings. The DEFAULT screen is still active and you can select any of the four presets... but that is it!

UNLOCK AMPLIFIER

You do remember your lock code right? You better because that is now the only way in! If you have not changed it then it is still at the factory default of 123.

UNLOCK AMPLIFIER - cont.

If you enter the wrong code the display will flash the mes- sage BAD CODE and return you to the UNLOCK screen.

AMP1 AMP2

You will need to call KICKER directly at (405) 624-8583 to handle this situation. You will need your amplifier’s serial number AND your receipt as the guys and gals answering the phone will need this information from you to help you out.

Operation

Use the UP and DOWN keys to

select LOCK IT UP or DON’T LOCK

and then press the ENT key to

ESC

HOME ENT

accept your setting.

 

 

If you selected LOCK IT UP the display will now show UNLOCK. The controls are now locked out.Press the ESC key to return to the DEFAULT scrolling screen.

If you selected DON’T LOCK then you will return to the MAIN menu and the amplifier will remain unlocked.

NOTE...

While your amplifier is in lock down you will notice the LOCK indicator on the ISIS VFD display is lit. This indicates your amplifier is locked down and will require a code to unlock it before any adjustments can be made.

To unlock your amplifier press the ENT key. The display will show UNLOCK. Press the ENT key again. You will now enter your code to unlock the amplifier.

The ESC and ENT keys move the blinking cursor left or right to select which character to enter.

Use the UP and DOWN keys to enter the character.

(A, B, C...1, 2, 3...etc)

When you are finished press and hold the HOME key for 1.5 seconds to enter your unlock code.

2 Times

ESC HOME ENT

ESC HOME ENT

ESC HOME ENT

ESC HOME ENT

LOCK LEFT SYS RIGHT MUTE

GAIN EQ LPF HPF PHASE KOMP

bad code

MEM-1

MEM-2 MEM-3 MEM-4

 

AMP1

AMP2

 

LOCK LEFT SYS RIGHT MUTE

 

GAIN EQ LPF HPF PHASE KOMP

 

 

unlock

 

MEM-1 MEM-2 MEM-3 MEM-4

 

Press the ENT key to enter your

HOME ENT

lock your code again.

ESC

 

 

Enter your code again making sure to place the correct character in the correct position in the display. Blank spaces count as part of the code so be sure you are entering it correctly.

Press the HOME key and try again. If you have found your error then the amp will unlock. If not, the flashing BAD CODE will greet you and you can try again.

If you have tried several times (several is defined as more than 3...less than 10) and you still can not unlock your amplifier, this more than likely means means you have forgotten your lock code.

So...before you call, gather this information up and have it ready to save us some time on the phone. Cool? Cool!

Better yet, take the time RIGHT NOW to fill out the first page in this manual and STAPLE your receipt to it. That way if or when you need service (like forgetting your lock code) you will have all the information you need right there in front of you.

Operation

If the code is correct the amp will unlock and drop you back

into the MAIN menu. If not, then read on...

28

SX .4 Series Amplifiers

SX .4 Series Amplifiers

29

Image 15
Contents Page Amplifier FeaturesVFD Display VFD DisplayM1 M2 M3 M4 Installation End Panel ViewsMounting Wiring Four Channel Operation StereoTWO Channel Operation Bridged Stereo and Bridged Simultaneously Using the Signal Output Jacks PastNavigation Using the Remote Bass Level Control & BlastPress Hold Lo-Pass Hi-Pass Phase Mute Kompressor SecuritySystem Menu SystemESC key to return to the Sick ESC Noise OFfC...1, 2, 3...etc Sick BAYAMP-1 /AMP-2 menu Memory-1 Memory-2 Memory-3Are Both AMPS, AMP-1 only and AMP-2 only 1V, 2V, 4V, 8VESC Home ENT A, B, C...1, 2, 3...etc Select Skip Reset or do ResetFrequency, bandwidth Frequency and slope.Use the UPHz to 20325 Hz Down keys to choose one and press the ENT key to select it Hz to 16132 HzOperation Unlock Amplifier Select Lock IT UP or DON’T LockMemory Presets €Green LED off, no output Troubleshooting€Other Symptoms HelpPerformance Model SX700.4 SX900.4 RMS PowerDynamic Power KompressorHeight Signal-t0-Noise RatioPower & Ground Terminals DSP Reaction Time / DelayPizza Delivery Chic’s Numbers Hook Ups

SX900.4, SX700.4 specifications

Kicker has long been a trusted name in the world of car audio, and their SX series amplifiers, specifically the SX700.4 and SX900.4, stand as proud representatives of the brand's commitment to superior sound quality and innovative technology. These amplifiers are designed to elevate your mobile audio experience, making them ideal choices for enthusiasts seeking high performance and reliability.

The Kicker SX700.4 is a four-channel amplifier that delivers 700 watts of peak power, providing ample power to drive multiple speakers simultaneously. Its RMS power output stands at an impressive 100 watts per channel at 4 ohms, making it capable of pushing even the most demanding speaker configurations. With a frequency response range of 20 Hz to 20 kHz, the SX700.4 ensures that both low bass and crisp highs are reproduced accurately, allowing for a rich and immersive listening experience.

On the other hand, the Kicker SX900.4, with its robust 900 watts of peak power, takes performance to the next level. The amplifier boasts a RMS output of 125 watts per channel at 4 ohms, offering additional headroom for larger speaker systems or subwoofers. With advanced circuitry and high-quality components, the SX900.4 delivers clarity and precision, bringing out the details in your favorite music.

One of the standout features of both models is their innovative technology, including Kicker’s Gain, Bass Boost, and crossover controls. These features allow users to customize their audio setup according to personal preferences and specific vehicle acoustics. The built-in crossovers enable seamless integration with various speaker types, ensuring that each component of your system works harmoniously.

Both amplifiers also incorporate Kicker’s modern design, with a sleek, durable chassis that not only looks good but also enhances heat dissipation for long-lasting performance. Additionally, the internal protection circuitry provides peace of mind, safeguarding the amplifiers from overheating, short circuits, and other potential damage.

The Kicker SX700.4 and SX900.4 are perfect for those looking to upgrade their car audio system with powerful, high-quality amplification. Whether you're a casual listener or a dedicated audiophile, these amplifiers promise a significant enhancement to your audio experience, making every journey more enjoyable with rich, dynamic sound.