Navigation

ESC HOME ENT

HOME ENT

INSTALLATION

USING THE REMOTE BASS LEVEL CONTROL & BLAST

You can use the Remote Bass Level Control to control the output of your amplifier from the front of the car.

Mount the controller by simply screwing the metal bracket to the chosen location and then slide the housing onto the bracket until it snaps into place.

Route the cable from the controller to the BLAST input jack on the amplifier chassis. That’s it.

If you wish to control more than one amplifier with your remote, you will simply need to use a RJ45 cable (not supplied but available at any Radio Shack, computer store or electronics center) to connect the BLAST output jack of the first amp to the BLAST input jack of the next amplifier.

On a KICKER SX.4 series amplifier you can control AMP 1, AMP 2 or both of them using the Remote Bass Level Controller. There is a setting you must adjust in the DSP to ‘tell’ the amplifier which one you want to control. See the Operation section of this manual for instructions on how to adjust this setting.

BACK VIEW

Mounting Surface

SIDE VIEW

SOURCE UNIT

SUPPLIED

CABLE	AMP 2 RCA CABLE (REAR)
	AMP 2 RCA CABLE (REAR)
	AMP 1 RCA CABLE (FRONT)

OPTIONAL

RJ45 CABLE

OPTIONAL

RJ45 CABLE

To Next Amplifier or Processor

Your KICKER SX series amplifier uses the latest in Digital DSP control and provides you with valuable operational informa- tion about your amplifier, real-time diagnostics and a full multi-level menu-driven operating system to access and adjust your amplifier.

The menu system is designed in layers. There is a starting point and you keep drilling down until you get to the menu item you want to view or change. This menu tree is an exam- ple of how the SX menu structure is set up.

NOTE: Not all the menus and menu items are shown below.

DEFAULT

SCREEN

MAIN MENU

* SYSTEM

GAIN

SYSTEM MENU

VOLT NOW

LO-PASS

VOLT MIN

HI-PASS

VOLT MAX

∝

TEMP NOW

...

TEMP MAX

RUN TIME

SICK BAY

...

SICK BAY MENU

∝

CURRENT

HISTORY

...

∝

As you can see there can be an infinite number of menu levels and each one of these menu levels can have an infinite number of its own items.

Navigating this simple menu

structure is very easy using the 5-way ESC HOME ENT keypad.

You use the UP and DOWN keys to scroll through the available menu items, and the ENT key is used to select that menu item. The ESC key backs you up one menu level from where you are, and the HOME key can returns you all the way to MAIN MENU by pressing and holding it for 1.5 seconds.

For example let’s begin at the DEFAULT SCREEN; our goal is to get to the HISTORY menu. Pressing the ENT key would get us to MAIN MENU. Now use the UP and

DOWN keys to scroll to SYSTEM, and

then press the ENT key. Now you are in the SYSTEM MENU. Using the UP and ESC DOWN keys again you scroll to SICK

BAY and press the ENT key. You are now in the SICK

BAY MENU. Use the UP and DOWN

keys again to scroll to HISTORY and then press the ENT key. That’s it! You are

there.

This is how you view information

and change settings in your KICKER SX amplifier.

Operation

SX .4 Series Amplifiers

SX900.4, SX700.4 specifications

Kicker has long been a trusted name in the world of car audio, and their SX series amplifiers, specifically the SX700.4 and SX900.4, stand as proud representatives of the brand's commitment to superior sound quality and innovative technology. These amplifiers are designed to elevate your mobile audio experience, making them ideal choices for enthusiasts seeking high performance and reliability.

The Kicker SX700.4 is a four-channel amplifier that delivers 700 watts of peak power, providing ample power to drive multiple speakers simultaneously. Its RMS power output stands at an impressive 100 watts per channel at 4 ohms, making it capable of pushing even the most demanding speaker configurations. With a frequency response range of 20 Hz to 20 kHz, the SX700.4 ensures that both low bass and crisp highs are reproduced accurately, allowing for a rich and immersive listening experience.

On the other hand, the Kicker SX900.4, with its robust 900 watts of peak power, takes performance to the next level. The amplifier boasts a RMS output of 125 watts per channel at 4 ohms, offering additional headroom for larger speaker systems or subwoofers. With advanced circuitry and high-quality components, the SX900.4 delivers clarity and precision, bringing out the details in your favorite music.

One of the standout features of both models is their innovative technology, including Kicker’s Gain, Bass Boost, and crossover controls. These features allow users to customize their audio setup according to personal preferences and specific vehicle acoustics. The built-in crossovers enable seamless integration with various speaker types, ensuring that each component of your system works harmoniously.

Both amplifiers also incorporate Kicker’s modern design, with a sleek, durable chassis that not only looks good but also enhances heat dissipation for long-lasting performance. Additionally, the internal protection circuitry provides peace of mind, safeguarding the amplifiers from overheating, short circuits, and other potential damage.

The Kicker SX700.4 and SX900.4 are perfect for those looking to upgrade their car audio system with powerful, high-quality amplification. Whether you're a casual listener or a dedicated audiophile, these amplifiers promise a significant enhancement to your audio experience, making every journey more enjoyable with rich, dynamic sound.