Kicker SX900.4 manual Hz to 16132 Hz, Down keys to choose one and press the ENT key to select it

Page 13

hi-passMENU - This menu is where you adjust the high pass crossover for each amplifier. There are two HI-PASS menus, one for AMP 1 and one for AMP 2. This allows each amplifier to have its own individual HI-PASS setting.

When you are done adjusting the selected amplifier’s HI-PASS crossover press the ESC key to return to the HI-PASS menu AMP-1 / AMP-2options

ESC HOME ENT

Phase MENU - Here you can switch the polarity of each amplifier’s channel(s) output between 0 or 180 degrees. There are two PHASE menus, one for AMP 1 and one for AMP 2. This allows each amplifier to have its own individual PHASE setting.

NOTE...

While adjusting the PHASE you will notice the PHASE indicator on the ISIS VFD display is lit. This indicates you are in the PHASE menu.

Use the UP and DOWN keys to scroll through AMP-1and AMP-2and press the ENT key to select the amplifier you want to adjust.

Your options for each amplifier are

ESC HOME ENT

to select the other amplifier.

If done adjusting the HI-PASS crossover, press the ESC key again to return to the MAIN menu

ESC HOME ENT

Use the UP and DOWN keys to scroll through AMP-1and AMP-2and press the ENT key to select the amplifier you want to adjust.

Use the UP and DOWN keys to

ESC HOME ENT

The AMP1 or AMP 2 indicator will light up to indicate which amplifier you are currently adjusting.

There is also a LEFT and a RIGHT indicator that will light up to let you know which channel (Left and/or Right) that you are currently adjusting.

frequency and slop[e.Use the UP

and DOWN keys to choose one and press the ENT key to select it.

ESC HOME ENT

NOTE...

While adjusting the HI-PASS crossover you will notice the hpf indicator on the ISIS VFD display is lit. This indicates you are in the HI-PASS crossover menu.

scroll through BOTH, LEFT and right. Press the ENT to select the one you want to adjust.

ESC HOME ENT

Operation

FREQUENCY selects the crossover point and can be set at any 1/12th octave frequency from 10 Hz to 16 kHz.

(10 Hz to 16132 Hz)

Use the UP and DOWN keys to

 

select your frequency. Press the ESC

 

key to return to the selected

ESC HOME ENT

amplifier’s HI-PASS menu.

 

SLOPE selects the rolloff of the crossover and can be set from OFF to 36 dB in 6 dB steps.

Use the UP and DOWN keys to

 

select your slope. Press the ESC

 

to return to the selected amplifier’s

ESC HOME ENT

HI-PASS menu.

 

The AMP1 or AMP 2 indicator will light up to indicate which amplifier you are currently adjusting.

The KICKER SX amplifier monitors and prevents any high pass crossover point from being any closer than 1/3 octave from the low pass crossover point. If you cannot set the high pass crossover where you want then check the LPF indicator and see if it is flashing. If it is then you need to go to the LO-PASS menu and lower the low pass crossover point.

This is done as a safety precaution to prevent a notch filter condition.

Now use the UP and DOWNkeys to select from 0 DEGREE or

180DEGREE. Press the ESC to return to the selected amplifier’s PHASE menu.

When you are done adjusting the selected amplifier’s phasing, press the ESC key again to return to the PHASE menu AMP-1 / AMP- 2 options to select the other amplifier.

If done adjusting the phasing, press the ESC key again to return to the MAIN menu

ESC HOME ENT

ESC HOME ENT

ESC HOME ENT

Operation

24

SX .4 Series Amplifiers

SX .4 Series Amplifiers

25

Image 13
Contents Page Amplifier FeaturesVFD Display VFD DisplayM1 M2 M3 M4 End Panel Views InstallationMounting Four Channel Operation Stereo WiringTWO Channel Operation Bridged Stereo and Bridged Simultaneously Using the Signal Output Jacks PastNavigation Using the Remote Bass Level Control & BlastSystem Lo-Pass Hi-Pass Phase Mute Kompressor SecurityMenu System Press HoldC...1, 2, 3...etc Noise OFfSick BAY ESC key to return to the Sick ESCAre Both AMPS, AMP-1 only and AMP-2 only Memory-1 Memory-2 Memory-31V, 2V, 4V, 8V AMP-1 /AMP-2 menuESC Home ENT A, B, C...1, 2, 3...etc Select Skip Reset or do ResetFrequency and slope.Use the UP Frequency, bandwidthHz to 20325 Hz Down keys to choose one and press the ENT key to select it Hz to 16132 HzOperation Unlock Amplifier Select Lock IT UP or DON’T LockMemory Presets €Other Symptoms TroubleshootingHelp €Green LED off, no outputDynamic Power Model SX700.4 SX900.4 RMS PowerKompressor PerformancePower & Ground Terminals Signal-t0-Noise RatioDSP Reaction Time / Delay HeightPizza Delivery Chic’s Numbers Hook Ups

SX900.4, SX700.4 specifications

Kicker has long been a trusted name in the world of car audio, and their SX series amplifiers, specifically the SX700.4 and SX900.4, stand as proud representatives of the brand's commitment to superior sound quality and innovative technology. These amplifiers are designed to elevate your mobile audio experience, making them ideal choices for enthusiasts seeking high performance and reliability.

The Kicker SX700.4 is a four-channel amplifier that delivers 700 watts of peak power, providing ample power to drive multiple speakers simultaneously. Its RMS power output stands at an impressive 100 watts per channel at 4 ohms, making it capable of pushing even the most demanding speaker configurations. With a frequency response range of 20 Hz to 20 kHz, the SX700.4 ensures that both low bass and crisp highs are reproduced accurately, allowing for a rich and immersive listening experience.

On the other hand, the Kicker SX900.4, with its robust 900 watts of peak power, takes performance to the next level. The amplifier boasts a RMS output of 125 watts per channel at 4 ohms, offering additional headroom for larger speaker systems or subwoofers. With advanced circuitry and high-quality components, the SX900.4 delivers clarity and precision, bringing out the details in your favorite music.

One of the standout features of both models is their innovative technology, including Kicker’s Gain, Bass Boost, and crossover controls. These features allow users to customize their audio setup according to personal preferences and specific vehicle acoustics. The built-in crossovers enable seamless integration with various speaker types, ensuring that each component of your system works harmoniously.

Both amplifiers also incorporate Kicker’s modern design, with a sleek, durable chassis that not only looks good but also enhances heat dissipation for long-lasting performance. Additionally, the internal protection circuitry provides peace of mind, safeguarding the amplifiers from overheating, short circuits, and other potential damage.

The Kicker SX700.4 and SX900.4 are perfect for those looking to upgrade their car audio system with powerful, high-quality amplification. Whether you're a casual listener or a dedicated audiophile, these amplifiers promise a significant enhancement to your audio experience, making every journey more enjoyable with rich, dynamic sound.