Kicker SX900.4 manual Height, Width, Length Without EndKaps, Frequency Response, Input Sensitivity

Page 19

Specifications

Specifications

to

 

all

 

models

common

.

 

Height:

2.5 inches / 6.35 centimeters

Width:

10 inches / 25.4 centimeters

Length Without EndKaps:

Subtract 5 inches (12.7 cm) from chart above

Frequency Response:

20 Hz - 20 kHz, +0 / -1 dB

Input Sensitivity:

62.5 mV - 16 V

Signal-t0-Noise Ratio:

>100 dB

High Pass Crossover Freq.:

10 Hz - 16 kHz in 1/12 Octave steps

High Pass Crossover Slope:

0 (off) - 36 dB in 6 dB steps

Low Pass Crossover Freq.:

30 Hz - 20 kHz in 1/12 Octave steps

Low Pass Crossover Slope:

0 (off) - 36 dB in 6 dB steps

KickEQ Frequency:

20 Hz - 20 kHz in 1/12 Octave steps

KickEQ Bandwidth (Q):

.5 to 10 in .5 steps

KickEQ Boost/Cut:

+/- 18 dB per Octave

Remote Bass Level Control:

Included with each amplifier

Power & Ground Terminals:

Will accept up to 2 Gauge wire

DSP Reaction Time / Delay:

0.7 milliseconds (In other Words...Real Fast!)

Friend’s Reaction:

That Shizzle's Off The Hizzle

Stranger’s Reaction:

Dude...Sweet...

ELECTRONICS LIMITED WARRANTY

Kicker warrants this product to be free from defects in material and workman- ship under normal use for a period of 90 DAYS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is warranted for TWO (2) YEARS from date of original purchase with receipt. If the product is labeled “B Stock” it is warranted for 90 DAYS from date of original purchase with receipt. If labeled “B Stock” and purchased from an Authorized KICKER Dealer, it is warranted for ONE (1) YEAR from date of purchase with receipt. In all cases you must have the original receipt! Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, Kicker will replace or repair (at its discretion) the defective mer- chandise with equivalent merchandise at no charge. Warranty replacements on “B-Stock” merchandise may have cosmetic scratches and blemishes. Discontinued products may be replaced with more current equivalent products.

This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties, therefore these exclusions may not apply to you.

This warranty gives you specific legal rights; however you may have other rights that vary from state to state.

WHAT TO DO IF YOU NEED WARRANTY OR SERVICE

Defective merchandise must be returned to your local Authorized Stillwater Designs (Kicker) Dealer for warranty. Assistance in locating an Authorized Dealer can be obtained by writing or calling Stillwater Designs direct. You can confirm that a dealer is authorized by asking to see a current authorized dealer window decal.

If it becomes necessary for you to return defective merchandise, call the Kicker Customer Service Department at (405)624-8510 for a Return Authorization (RMA) number. Package all defective items in the original container or in a pack- age that will prevent shipping damage, and return to

Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075

The RMA number must be clearly marked on the outside of the package. Return only defective components. Return of entire cabinets, system packs, pairs, etc. increases your return freight charges. Non-defective items received will be returned freight collect.

Include a dated proof-of-purchasestating the Customer name, Dealer name, product purchased and date of purchase. Warranty expiration on items without proof-of-purchase will be determined from type of sale and the manu- facturing date code. Freight must be prepaid; items received freight collect will be refused.

Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service Department at (405)624-8510.

WHAT IS NOT COVERED?

This warranty is valid only if the product is used for the purpose for which it was designed.

It does not cover:

Damage due to improper installation.

Subsequent damage to other components.

Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation.

Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be considered abuse.

Any cost or expense related to the removal or reinstallation of product.

Speakers damaged due to amplifier clipping or distortion.

Items previously repaired or modified by any unauthorized repair facility.

Return shipping on non-defective items.

Products with tampered or missing barcode labels.

Products returned without a Return Authorization (RMA) number.

Freight Damage.

The cost of shipping product to Kicker.

Service performed by anyone other than Kicker.

Speaker with any foreign caulk used for gasket material.

HOW LONG WILL IT TAKE?

Kicker strives to maintain a goal of 24-hour service for all returns. Delays may be incurred if lack of replacement inventory or parts is encountered.

INTERNATIONAL WARRANTY

Contact your International Kicker dealer or distributor concerning specific procedures for your country’s warranty policies.

P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510

KICKER drivers are capable of producing sound levels that can permanently damage your hearing! Turning

WARNING: up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your hearing.

Please use common sense when controlling volume!

Warranty

36

SX .4 Series Amplifiers

SX .4 Series Amplifiers

April 2003 37

Image 19
Contents Page Amplifier FeaturesVFD Display VFD DisplayM1 M2 M3 M4 End Panel Views InstallationMounting Four Channel Operation Stereo WiringTWO Channel Operation Bridged Stereo and Bridged Simultaneously Using the Signal Output Jacks PastNavigation Using the Remote Bass Level Control & BlastPress Hold Lo-Pass Hi-Pass Phase Mute Kompressor SecuritySystem Menu SystemESC key to return to the Sick ESC Noise OFfC...1, 2, 3...etc Sick BAYAMP-1 /AMP-2 menu Memory-1 Memory-2 Memory-3Are Both AMPS, AMP-1 only and AMP-2 only 1V, 2V, 4V, 8VESC Home ENT A, B, C...1, 2, 3...etc Select Skip Reset or do ResetFrequency and slope.Use the UP Frequency, bandwidthHz to 20325 Hz Down keys to choose one and press the ENT key to select it Hz to 16132 HzOperation Unlock Amplifier Select Lock IT UP or DON’T LockMemory Presets €Green LED off, no output Troubleshooting€Other Symptoms HelpPerformance Model SX700.4 SX900.4 RMS PowerDynamic Power KompressorHeight Signal-t0-Noise RatioPower & Ground Terminals DSP Reaction Time / DelayPizza Delivery Chic’s Numbers Hook Ups

SX900.4, SX700.4 specifications

Kicker has long been a trusted name in the world of car audio, and their SX series amplifiers, specifically the SX700.4 and SX900.4, stand as proud representatives of the brand's commitment to superior sound quality and innovative technology. These amplifiers are designed to elevate your mobile audio experience, making them ideal choices for enthusiasts seeking high performance and reliability.

The Kicker SX700.4 is a four-channel amplifier that delivers 700 watts of peak power, providing ample power to drive multiple speakers simultaneously. Its RMS power output stands at an impressive 100 watts per channel at 4 ohms, making it capable of pushing even the most demanding speaker configurations. With a frequency response range of 20 Hz to 20 kHz, the SX700.4 ensures that both low bass and crisp highs are reproduced accurately, allowing for a rich and immersive listening experience.

On the other hand, the Kicker SX900.4, with its robust 900 watts of peak power, takes performance to the next level. The amplifier boasts a RMS output of 125 watts per channel at 4 ohms, offering additional headroom for larger speaker systems or subwoofers. With advanced circuitry and high-quality components, the SX900.4 delivers clarity and precision, bringing out the details in your favorite music.

One of the standout features of both models is their innovative technology, including Kicker’s Gain, Bass Boost, and crossover controls. These features allow users to customize their audio setup according to personal preferences and specific vehicle acoustics. The built-in crossovers enable seamless integration with various speaker types, ensuring that each component of your system works harmoniously.

Both amplifiers also incorporate Kicker’s modern design, with a sleek, durable chassis that not only looks good but also enhances heat dissipation for long-lasting performance. Additionally, the internal protection circuitry provides peace of mind, safeguarding the amplifiers from overheating, short circuits, and other potential damage.

The Kicker SX700.4 and SX900.4 are perfect for those looking to upgrade their car audio system with powerful, high-quality amplification. Whether you're a casual listener or a dedicated audiophile, these amplifiers promise a significant enhancement to your audio experience, making every journey more enjoyable with rich, dynamic sound.