Kicker SX700.4, SX900.4 Stereo and Bridged Simultaneously, Using the Signal Output Jacks Past

Page 6

Installation

STEREO AND BRIDGED SIMULTANEOUSLY

SX.4 series amplifiers are capable of operating into a minimum imedance of 2 ohms per channel in stereo mode and 4 ohms bridged in mono mode. AMP 1 can be bridged while AMP 2 is in stereo OR AMP 2 can be bridged while AMP 1 is in stereo.

 

AMP 1 IN

RIGHT

LEFT

GROUND

AMP 2 IN

SPEAKER(S)

SPEAKER(S)

SIGNAL OUT

 

 

__

USING THE SIGNAL OUTPUT JACKS (PAST)

The Output (Pre Amp Signal Transfer) RCA jacks allow you to send the incoming signal from the AMP 1 RCA input jacks on one Kicker SX.4 series amplifier to another amplifier or proces- sor without the need for Y cables. The signal from the PAST jacks is identical to the signal fed to the amplifier via its AMP 1 RCA input jacks and is not affected by any of the amplifier’s built-in digital signal processing.

SOURCE UNIT

AMP 2 RCA CABLE (REAR)

AMP 1 RCA CABLE (FRONT)

Installation

REMOTE

 

TURN-ON

 

18"

 

or less

 

+12V

FUSE

BATTERY

 

 

 

 

+

+

 

 

 

R-

 

*

kicker *

R+

 

 

 

 

L-

 

 

 

 

L+

_

 

 

 

R+

M1

M2 M3

M4

 

R-

 

ESC

HOME

ENT

L-

 

L+

+

Most head units with high voltage outputs should be capa- ble of driving up to ten amplifiers in a chain.

If only using one RCA cable to feed signal into your SX.4 series amplifier, be sure to use the AMP 1 input on the amplifier. The AMP 1 input will feed signal to AMP 2 and the PAST RCA jacks.

BRIDGED

SPEAKER(S)

These are just a few of the many ways you can use your SX.4 series Kicker amplifier. These system diagrams are designed to give you a basic understanding of the most com- mon uses for this amplifier. For more complex systems please visit your local authorized Kicker dealer. You can also download the SX Technical Manual from our website at www.kicker.com for more detailed information and complex system diagrams.

If your source unit has front and rear RCA outputs and you want to enable fading, simply use an additional cable to connect AMP 2 to your source unit.

To Next Amplifier or Processor

10

SX .4 Series Amplifiers

SX .4 Series Amplifiers

11

Image 6
Contents Page Features AmplifierVFD Display VFD DisplayM1 M2 M3 M4 Installation End Panel ViewsMounting Wiring Four Channel Operation StereoTWO Channel Operation Bridged Using the Signal Output Jacks Past Stereo and Bridged SimultaneouslyUsing the Remote Bass Level Control & Blast NavigationMenu System Lo-Pass Hi-Pass Phase Mute Kompressor SecuritySystem Press HoldSick BAY Noise OFfC...1, 2, 3...etc ESC key to return to the Sick ESC1V, 2V, 4V, 8V Memory-1 Memory-2 Memory-3Are Both AMPS, AMP-1 only and AMP-2 only AMP-1 /AMP-2 menuSelect Skip Reset or do Reset ESC Home ENT A, B, C...1, 2, 3...etcFrequency, bandwidth Frequency and slope.Use the UPHz to 20325 Hz Hz to 16132 Hz Down keys to choose one and press the ENT key to select itOperation Select Lock IT UP or DON’T Lock Unlock AmplifierMemory Presets Help Troubleshooting€Other Symptoms €Green LED off, no outputKompressor Model SX700.4 SX900.4 RMS PowerDynamic Power PerformanceDSP Reaction Time / Delay Signal-t0-Noise RatioPower & Ground Terminals HeightPizza Delivery Chic’s Numbers Hook Ups

SX900.4, SX700.4 specifications

Kicker has long been a trusted name in the world of car audio, and their SX series amplifiers, specifically the SX700.4 and SX900.4, stand as proud representatives of the brand's commitment to superior sound quality and innovative technology. These amplifiers are designed to elevate your mobile audio experience, making them ideal choices for enthusiasts seeking high performance and reliability.

The Kicker SX700.4 is a four-channel amplifier that delivers 700 watts of peak power, providing ample power to drive multiple speakers simultaneously. Its RMS power output stands at an impressive 100 watts per channel at 4 ohms, making it capable of pushing even the most demanding speaker configurations. With a frequency response range of 20 Hz to 20 kHz, the SX700.4 ensures that both low bass and crisp highs are reproduced accurately, allowing for a rich and immersive listening experience.

On the other hand, the Kicker SX900.4, with its robust 900 watts of peak power, takes performance to the next level. The amplifier boasts a RMS output of 125 watts per channel at 4 ohms, offering additional headroom for larger speaker systems or subwoofers. With advanced circuitry and high-quality components, the SX900.4 delivers clarity and precision, bringing out the details in your favorite music.

One of the standout features of both models is their innovative technology, including Kicker’s Gain, Bass Boost, and crossover controls. These features allow users to customize their audio setup according to personal preferences and specific vehicle acoustics. The built-in crossovers enable seamless integration with various speaker types, ensuring that each component of your system works harmoniously.

Both amplifiers also incorporate Kicker’s modern design, with a sleek, durable chassis that not only looks good but also enhances heat dissipation for long-lasting performance. Additionally, the internal protection circuitry provides peace of mind, safeguarding the amplifiers from overheating, short circuits, and other potential damage.

The Kicker SX700.4 and SX900.4 are perfect for those looking to upgrade their car audio system with powerful, high-quality amplification. Whether you're a casual listener or a dedicated audiophile, these amplifiers promise a significant enhancement to your audio experience, making every journey more enjoyable with rich, dynamic sound.