Noise OFf, C...1, 2, 3...etc, Sick BAY, Press

SYSTEM MENU - This menu item contains many diagnostic tools and first time setup options. Use the UP and DOWN arrow keys to scroll through the options and press ENT to select. Press the ESC key to return to the SYSTEM menu.

7a.) CURRENT shows amplifiers current status or fault code. The 6 possible codes are:

normal - No problem, normal operation. thermal - Thermal cutoff protection engaged.

SICK BAY - cont

7c.) PINK NOISE is a built in pink noise generator to test operation of the amplifier

8.) Amp Name - Here you can assign a unique name to your KICKER SX amplifier. This name will replace the model name in the DEFAULT screen. If you change your mind and do not want to change the name, press and hold the HOME key for 1.5 seconds BEFORE making any changes.

Operation

1.) Volt Now - Displays the current voltage at the amplifiers +12 volt terminal.

2.) Volt Min - Displays the lowest voltage seen at the amplifiers +12 volt terminal since being installed.

3.) Volt Max - Displays the highest voltage at the amplifiers +12 volt terminal since being installed.

4.) Temp Now - Displays the current temperature of the amplifier.

short - Short circuit protection engaged. Hi-Volt- High voltage protection engaged. FUSE - Faulty or blown power fuse.

SERVICE - Amp requires service by KICKER.

When you are done viewing the current status press the

ESC key to return to the SICK ESC

HOME

ENT

BAY menu.

7b. )HISTORY logs the last 5 fault codes and how

Use the UP and DOWN keys to select NOISE ON or

NOISE OFf.

When the PINK NOISE is ON the LEFT and RIGHT indicators in the ISIS VFD will blink on and off.

ESC HOME ENT

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

noise on

MEM-1 MEM-2 MEM-3 MEM-4

The ESC and ENT keys move the cursor left or right to select which character to change.

Use the UP and DOWN keys to change the character displayed

ESC HOME ENT

Operation

5.) Temp Max - Displays the highest temperature the amplifier has reached since being installed.

long ago they happened when compared to the RUN TIME log.

Use the UP and DOWN

When you are done using the PINK NOISE generator press the ESC key to return to the SICK BAY menu.

ESC HOME ENT

(A, B, C...1, 2, 3...etc)

ESC HOME ENT

PRESS &

6.) Run Time - Displays the total time the amplifier has been powered up since installation in 1/10th of an hour increments

7.) Sick Bay - Contains several diagnostic tools. Once in this menu you use the UP and DOWN keys to scroll through CURRENT, HISTORY and PINK NOISE options. Press the ENT

keys to select the HISTORY log entry you want to view.

Press and hold the ENT key to view the time it happened.

When you are done viewing the history press the ESC key.

ESC HOME ENT

NOTE...

If you exit the SICK BAY menu with the PINK NOISE generator still on, the LEFT and RIGHT ISIS VFD indicators will remain blinking as a reminder.

When you are finished press and hold the HOME key for 1.5 seconds to save your new amplifier name.

HOLD

ESC HOME ENT

key to select.

ESC HOME ENT

SX .4 Series Amplifiers

SX900.4, SX700.4 specifications

Kicker has long been a trusted name in the world of car audio, and their SX series amplifiers, specifically the SX700.4 and SX900.4, stand as proud representatives of the brand's commitment to superior sound quality and innovative technology. These amplifiers are designed to elevate your mobile audio experience, making them ideal choices for enthusiasts seeking high performance and reliability.

The Kicker SX700.4 is a four-channel amplifier that delivers 700 watts of peak power, providing ample power to drive multiple speakers simultaneously. Its RMS power output stands at an impressive 100 watts per channel at 4 ohms, making it capable of pushing even the most demanding speaker configurations. With a frequency response range of 20 Hz to 20 kHz, the SX700.4 ensures that both low bass and crisp highs are reproduced accurately, allowing for a rich and immersive listening experience.

On the other hand, the Kicker SX900.4, with its robust 900 watts of peak power, takes performance to the next level. The amplifier boasts a RMS output of 125 watts per channel at 4 ohms, offering additional headroom for larger speaker systems or subwoofers. With advanced circuitry and high-quality components, the SX900.4 delivers clarity and precision, bringing out the details in your favorite music.

One of the standout features of both models is their innovative technology, including Kicker’s Gain, Bass Boost, and crossover controls. These features allow users to customize their audio setup according to personal preferences and specific vehicle acoustics. The built-in crossovers enable seamless integration with various speaker types, ensuring that each component of your system works harmoniously.

Both amplifiers also incorporate Kicker’s modern design, with a sleek, durable chassis that not only looks good but also enhances heat dissipation for long-lasting performance. Additionally, the internal protection circuitry provides peace of mind, safeguarding the amplifiers from overheating, short circuits, and other potential damage.

The Kicker SX700.4 and SX900.4 are perfect for those looking to upgrade their car audio system with powerful, high-quality amplification. Whether you're a casual listener or a dedicated audiophile, these amplifiers promise a significant enhancement to your audio experience, making every journey more enjoyable with rich, dynamic sound.