Dryness Control
The Dryness Control regulates the amount of moisture in the room. Turn the control knob clockwise for more drying. Turn the control knob counterclockwise for less drying. Turn the control knob to “Dry” to maintain average humidity conditions.
NOTE: For the first few days of use, turn the DRYNESS CONTROLclockwise to CONTINU- OUS RUN to remove extra moisture from the furnishings as well as the room air.
SETTING THE CONTROLS (CONTROL TYPE 3 ONLY)
Starting/Stopping the Dehumidifier
NOTES:
•Before turning on the dehumidifier, be sure that the bucket is empty and fits all the way into the dehumidifier.
•Each time you unplug the dehumidifier or power is interrupted, the control will return to your previous settings when power is restored.
Control Type 3
NOTE: Minimum operating temperature is 38°F (3°C).
A
CB
A.Light glows, indicating the bucket is full or is not in correct position.
B.Adjusts amount of moisture removed from room.
C.Selects fan speed.
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
1.Plug into a grounded 3 prong outlet.
2.Press POWER to turn on dehumidifier.
IMPORTANT: If the Empty/Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket.
3.Press POWER to turn off dehumidifier.
NOTE: The dehumidifier will retain your last settings.
Empty/Adjust Bucket Light
If this light is on, the dehumidifier is not running. This light indicates that you need to check:
•If the bucket is full, empty and reinstall bucket.
•If the bucket is not in position, remove the bucket and reinstall. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.
Fan Speed (Control Type 3 Models Only)
1.Press FAN to select fan speed.
2.Choose Low, High or Auto.
•
•