Whirlpool AD35DSS, AD50DSS manual To remove the bucket switch Electronic Model, Mechanical Models

Page 27

4.To remove the bucket switch: Electronic Model:

a)Disconnect the two black wires from the N.C. and COM switch terminals.

Mechanical Models:

b)Disconnect the black (COM), tan (N.O.), and yellow (N.C.) wires from the switch terminals.

c)Press the locking tab, push the switch holder through the cutout, and remove it from the dehumidifier.

Bucket Switch

BK (N.C.)	BK (COM)
	BK (COM)
	Electronic Model
YL (N.C.)	Bucket Switch
	Bucket Switch

TN (N.O.)

BK (COM)

Mechanical Models

Press Tab & Push In

Switch Holder

d)Unclip the bucket switch and remove it from the holder.

Bucket Switch

Holder

Unclip Switch

To Remove

3-11

Image 27

Contents Models AD25BSS, AD35DSS, AD50DSS DehumidifiersGoals and Objectives ForwardTable of Contents Page Immediately follow instructions Dehumidifier SafetyGeneral You can be killed or seriously injured if you don’tAD = Dehumidiﬁer, Whirlpool RD = Dehumidiﬁer, Roper Model & Serial Number DesignationsModel Number Serial NumberModel & Serial Number Wiring Diagram Label Locations Page Removing Unwanted Humidity What is HUMIDITY?Product Operation Theory of OperationTypical Operation Operating CharacteristicsPage Fan Speed Control Type 2 Models Only Empty/Adjust Bucket LightDehumidifier USE Starting/Stopping the Dehumidiﬁer Control TypeDryness Control Starting/Stopping the DehumidiﬁerFan Speed Control Type 3 Models Only Desired Humidity Control Type 3 Models Only Draining the DehumidifierOption 2-Connect Drain Hose Normal SoundsCleaning the AIR Filter on Some Models Cleaning the DehumidifierDehumidifier Care Component Locations Component AccessRemoving the Cabinet Top Rear Screws Rear Half Front Half Bottom Rear Screw Remove the two hex-head screws from the electronic control Thermistor & Clip Ground Wire Screw To remove the light To remove the mechanical humidistatTo remove the power supply cord Removing the FAN Capacitor and the FAN Motor To remove the fan capacitor see the top right photoTo remove the fan motor Top green ground wire on condenser To remove the compressor capacitor Removing the Compressor Capacitor and the Bucket SwitchMechanical Models To remove the bucket switch Electronic ModelPage Mechanical Humidistat FAN Capacitor Component TestingFAN Motor Bucket SwitchDiagnostics Diagnostics & TroubleshootingProblem Cause Correction TroubleshootingWiring Diagram Wiring DiagramsWiring Diagram Wiring Diagram Page Page Page Product Specifications Warranty Information Sources For Technical Information and Service PointersFor Technical Assistance While AT the CUSTOMER’S Home Call Corporation