Icom IC-M504 instruction manual Push Dialenter to transmit the individual call

DSC OPERATION 6

eRotate [DIAL] to select the desired pre-programmed indi-

vidual address or “Manual Input,” push

[DIAL•ENTER].

•The ID code for the individual call can be set in advance. (p. 17)

•When “Manual Input” is selected, set the 9-digit MMSI number for the individual you wish to call by rotating [DIAL].

1st digit must not be ‘0’.

--DSC Menu--

Select Address

Manual Input John

˘Paul George Michael <CLR˘Exit / ENT˘OK>

rRotate [DIAL] to select a desired intership channel, push [DIAL•ENTER].

•Intership channels are already preset into the transceiver in rec- ommended order.

--DSC Menu--

Select Intership CH

˘08	6
69
77
06
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Individual Call Ready

<CLR˘Exit / ENT˘OK>

tPush [DIAL•ENTER] to transmit the individual call.

•If Channel 70 is busy, the transceiver stands by until the channel becomes clear.

--DSC Menu--

Individual Call

Transmitting

27