Icom IC-M504 instruction manual Transmitting a group call

Page 35

rRotate [DIAL] to select “Able to Comply” or “Un- able to Comply,” push [DIAL•ENTER].

•When “Unable to Comply” is selected, “No Reason Given” will be transmitted.

--DSC Menu--

Select Action ˘Able to Comply

Unable to Comply

<CLR˘Exit / ENT˘OK>

--DSC Menu--

Individual ACK Ready

<CLR˘Exit / ENT˘OK>

tPush [DIAL•ENTER] to transmit the acknowledgement call to the selected station.

yAfter the individual acknowledgement call has been trans- mitted, the speciﬁed channel (speciﬁed by the calling sta- tion) is selected automatically when “Able to Com- ply” is selected, or returns to the previous condition (before entering the DSC menu) when “Unable to Comply” is selected in step r.

DSC OPERATION 6

DTransmitting a group call

The group call function allows you to transmit a DSC signal to a speciﬁc group only.

qPush [MENU] to enter the DSC menu.

wRotate [DIAL] to select “Group Call,” push [DIAL•ENTER].

• “Position Input” item appears when a GPS receiver	6
(NMEA0183 ver. 2.0 or 3.01) is not connected.

--DSC Menu--

Select Item

Position Input

Individual Call

˘Group Call

All Ships Call

Position Request

Position Report

eRotate [DIAL] to select the desired pre-programmed group address or “Manual Input,” push [DIAL•ENTER].

•The ID code for the group call can be set in advance. (p. 19)

•When “Manual Input” is selected, set the 8-digit ID code for the group you wish to call by rotating [DIAL].

--DSC Menu--

Select Address

Manual Input ˘Icom

Coast station

<CLR˘Exit / ENT˘OK>

29

Image 35

Contents IM504 Personal injury, ﬁre or electric shock Word DefinitionMay occur Equipment damage may occurCase of Emergency Iii Determining MPE RadiusTable of Contents Precautions OPERATOR’S License Operating RulesRadio license for boaters U.S.A. only Ship Station LicenseFront panel Panel Description2TRANSMIT Power KEY H/L Function display 0TIME Zone IndicatorMicrophone 1POSITION Indicator2SCAN Indicator Channel 9 Call channel Basic OperationChannel selection ChannelRotate Dial to select a channel S.A., international and Canadian channelsWeather channels C to change the channel group, if necessaryReceiving and transmitting Push CH/WXDUAL Call channel programmingWhile pushing and holding Select the desired charac Channel commentsMicrophone Lock function Display backlightDialenter Optional voice scrambler operationActivating the scrambler Programming scrambler codes Normal Scan Scan OperationScan types Priority ScanStarting a scan Setting TAG channelsClearing or setting all tagged channels DUALWATCH/TRI-WATCH Simulation DUALWATCH/TRI-WATCHDescription OperationRotate Dial to set the speciﬁc 9-digit Mmsi code DSC OperationMmsi code programming Rotate Dial to select Mmsi Check, push DialenterCheck the 9-digit Mmsi DSC self ID code Mmsi code checkRotate Dial to set the individual ID and ID name DSC address IDProgramming Individual ID Rotate Dial to select AddINDV ID, push DialenterRotate Dial to select the desired ID name for deleting Deleting Individual IDRotate Dial to select Delindv ID, push Dialenter Rotate Dial to set the group ID and ID name Programming Group IDRotate Dial to select AddGroup ID, push Dialenter Rotate Dial to select DELGroup ID, push Dialenter Deleting Group IDPosition and time programming GPS information indication Position and time indicationAfter 2 sec. Wait ACK Distress callSimple call Regular call Distress alert contains defaultPush Distress for 5 sec. to transmit the distress call Transmitting an individual call Transmitting DSC callsPush Dialenter to transmit the individual call Transmitting an individual acknowledgement Transmitting a group call Push Dialenter to transmit the group call Push Dialenter to transmit the all ships call Transmitting an all ships callRotate Dial to select the desired category, push Dialenter Transmitting a position request call Push Dialenter to transmit the position request call Transmitting a position report call Push Dialenter to transmit the position report call Push Dialenter to transmit the polling request call Transmitting a polling request callTransmitting a position request reply call Your position data is transmitted, when Dialenter is pushed Transmitting a position report reply call Transmitting a polling request reply call Receiving a distress relay call Receiving DSC callsReceiving a distress call Receiving a distress acknowledgementReceiving an all ships call Receiving an individual callReceiving a group call Receiving a position report call Receiving a geographical area callReceiving a position request call Receiving a polling request reply call Receiving a polling request callReceiving a position request reply call Receiving a position report reply callRotate Dial to scroll the message Received messagesDistress message Rotate Dial to select Distress, push DialenterRotate Dial to select Other, push Dialenter Other messagesRotate Dial to select Offset Time, push Dialenter DSC Set modeNo offset time default Push Dialenter to set the condition Automatic acknowledgementRotate Dial to select Auto ACK, push Rotate Dial to select Nmea Output, push Dialenter Nmea OutputHM-162 listener Other FunctionsIntercom operation RX Speaker function To return to normal operation, push CLR or Hailrx Push Hailrx to enter hailer modeHailer operation Sail Automatic foghorn functionUnderway StopIng DSC calls.’ p Rotate Dial to adjust the foghorn level, push DialenterTion is interrupted with an automatic return to the trans Scan resume timer SET ModeSet mode programming Set mode itemsLCD contrast Weather alertDual/Tri-watch Beep toneScrambler code Radio powerAutomatic foghorn frequency Scrambler typeConnections Connections and Maintenance0DC Power Connector Antenna Fuse replacementSupplied accessories Mounting the transceiver Using the supplied mounting bracketThat the clamps press firmly against the inside MB-75 installationTighten the end bolts on the clamps rotate clockwise so UT-112/UT-98 installation Return the cables and screws to the original position HM-162/HM-157 installationHM-162 HM-157 Completed installation should look like thisHM-162 HM-157Gasket Mm 131⁄32˝ Nut Cap Problem Possible Cause Solution TroubleshootingTransmitter Specifications and OptionsSpeciﬁcations General Receiver20 feet microphone extension cable for optional HM DimensionsOptions For mounting the transceiver to a panelTransmit Receive Channel ListUnit mm inch Cut here TemplateR12 Max Page Memo Kamiminami, Hirano-ku, Osaka 547-0003, Japan