Icom IC-M504 instruction manual Transmitting a position request call, Dialenter

6 DSC OPERATION

tAfter the all ships call has been transmitted, the following indication is displayed.

--DSC Menu--

All Ships Call

TX Complete

<CLR˘Exit>

yPush [CLR] to exit and the transceiver selects Channel 16 automatically.

•Even if [CLR] hasn’t been pushed, the transceiver automatically selects Channel 16 after 2 sec. of inactivity.

DTransmitting a position request call

Transmit a position request call when you want to know a specific ship’s current position, etc.

qPush [MENU] to enter the DSC menu.

wRotate [DIAL] to select “Position Request,” push [DIAL•ENTER].

•“Position Input” item appears when a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is not connected.

--DSC Menu--

Select Item

Position Input

Individual Call

Group Call

All Ships Call

˘Position Request

Position Report

eRotate [DIAL] to select the desired pre-programmed indi-

vidual address or “Manual Input,” push

[DIAL•ENTER].

•The ID code can be set in advance. (p. 17)

•When “Manual Input” is selected, set the 9-digit MMSI number for the individual you wish to call by rotating [DIAL].

32