Icom IC-M504 instruction manual Weather alert, Dual/Tri-watch, Beep tone, LCD contrast

Page 62

8 SET MODE

DWeather alert

A NOAA broadcast station transmits a weather alert tone be- fore important weather information.

When “ON” is selected, the previously selected (used) weather channel is checked any time during standby or while scanning. When “ON with WX SCAN” is selected, the weather chan- nels are checked in sequence during standby or while scan- ning.

The “WX ALERT” indicator blinks until the transceiver is op- erated after the transceiver detects the alert.

•“WX ALERT” appears instead of “WX” indication when the function is set ON.

--Set Mode-- WX Alert

ON

ON with WX SCAN ˘OFF

<ENT˘OK>

Default: OFF

DDual/Tri-watch

This item can be selected as Dualwatch or Tri-watch. (p. 14)

--Set Mode-- Dual/Tri

Tri-watch ˘Dualwatch

<ENT˘OK>

Default: Dualwatch

.D Beep tone

You can select the silent operation by turning beep tones OFF or you can have conﬁrmation beeps sound at the push of a key by turning beep tones ON.

--Set Mode--

Beep ˘ON

OFF

<ENT˘OK>

Default: ON

DLCD contrast

The LCD contrast can be adjustable to 8 levels. The level 1 is the lowest contrast, and the level 8 is the highest contrast.

--Set Mode-- Contrast

˘5

4

3

2

1

<ENT˘OK>

Default: 5

56

Image 62

Contents IM504 Equipment damage may occur Word DefinitionMay occur Personal injury, ﬁre or electric shockCase of Emergency Determining MPE Radius IiiTable of Contents Precautions Ship Station License Operating RulesRadio license for boaters U.S.A. only OPERATOR’S LicensePanel Description Front panel2TRANSMIT Power KEY H/L 0TIME Zone Indicator Function displayMicrophone 1POSITION Indicator2SCAN Indicator Channel Basic OperationChannel selection Channel 9 Call channelC to change the channel group, if necessary S.A., international and Canadian channelsWeather channels Rotate Dial to select a channelReceiving and transmitting Push CH/WXDUAL Call channel programmingWhile pushing and holding Display backlight Channel commentsMicrophone Lock function Select the desired characDialenter Optional voice scrambler operationActivating the scrambler Programming scrambler codes Priority Scan Scan OperationScan types Normal ScanStarting a scan Setting TAG channelsClearing or setting all tagged channels Operation DUALWATCH/TRI-WATCHDescription DUALWATCH/TRI-WATCH SimulationRotate Dial to select Mmsi Check, push Dialenter DSC OperationMmsi code programming Rotate Dial to set the speciﬁc 9-digit Mmsi codeMmsi code check Check the 9-digit Mmsi DSC self ID codeRotate Dial to select AddINDV ID, push Dialenter DSC address IDProgramming Individual ID Rotate Dial to set the individual ID and ID nameRotate Dial to select the desired ID name for deleting Deleting Individual IDRotate Dial to select Delindv ID, push Dialenter Rotate Dial to set the group ID and ID name Programming Group IDRotate Dial to select AddGroup ID, push Dialenter Deleting Group ID Rotate Dial to select DELGroup ID, push DialenterPosition and time programming Position and time indication GPS information indicationAfter 2 sec. Wait ACK Distress callSimple call Distress alert contains default Regular callPush Distress for 5 sec. to transmit the distress call Transmitting DSC calls Transmitting an individual callPush Dialenter to transmit the individual call Transmitting an individual acknowledgement Transmitting a group call Push Dialenter to transmit the group call Push Dialenter to transmit the all ships call Transmitting an all ships callRotate Dial to select the desired category, push Dialenter Transmitting a position request call Push Dialenter to transmit the position request call Transmitting a position report call Push Dialenter to transmit the position report call Transmitting a polling request call Push Dialenter to transmit the polling request callTransmitting a position request reply call Your position data is transmitted, when Dialenter is pushed Transmitting a position report reply call Transmitting a polling request reply call Receiving a distress acknowledgement Receiving DSC callsReceiving a distress call Receiving a distress relay callReceiving an all ships call Receiving an individual callReceiving a group call Receiving a position report call Receiving a geographical area callReceiving a position request call Receiving a position report reply call Receiving a polling request callReceiving a position request reply call Receiving a polling request reply callRotate Dial to select Distress, push Dialenter Received messagesDistress message Rotate Dial to scroll the messageOther messages Rotate Dial to select Other, push DialenterRotate Dial to select Offset Time, push Dialenter DSC Set modeNo offset time default Push Dialenter to set the condition Automatic acknowledgementRotate Dial to select Auto ACK, push Nmea Output Rotate Dial to select Nmea Output, push DialenterHM-162 listener Other FunctionsIntercom operation RX Speaker function To return to normal operation, push CLR or Hailrx Push Hailrx to enter hailer modeHailer operation Stop Automatic foghorn functionUnderway SailIng DSC calls.’ p Rotate Dial to adjust the foghorn level, push DialenterTion is interrupted with an automatic return to the trans Set mode items SET ModeSet mode programming Scan resume timerBeep tone Weather alertDual/Tri-watch LCD contrastScrambler type Radio powerAutomatic foghorn frequency Scrambler codeConnections Connections and Maintenance0DC Power Connector Antenna Fuse replacementSupplied accessories Using the supplied mounting bracket Mounting the transceiverThat the clamps press firmly against the inside MB-75 installationTighten the end bolts on the clamps rotate clockwise so UT-112/UT-98 installation HM-162/HM-157 installation Return the cables and screws to the original positionHM-157 Completed installation should look like thisHM-162 HM-162 HM-157Gasket Mm 131⁄32˝ Nut Cap Troubleshooting Problem Possible Cause SolutionGeneral Receiver Specifications and OptionsSpeciﬁcations TransmitterFor mounting the transceiver to a panel DimensionsOptions 20 feet microphone extension cable for optional HMChannel List Transmit ReceiveUnit mm inch Cut here TemplateR12 Max Page Memo Kamiminami, Hirano-ku, Osaka 547-0003, Japan