Icom IC-M504 SET Mode, Set mode programming, Set mode items, Scan type, Scan resume timer

Page 61

■Set mode programming

Set mode is used to change the conditions of the transceiver’s functions: Scan type, Scan resume timer, Weather alert, Dual/Tri-watch, Beep tone, LCD contrast, Automatic foghorn fre- quency, Radio power, Scrambler type* and Scrambler code.*

*Appears only when the optional scrambler unit is installed.

Available functions may differ depending on how they are set by the dealer.

qTurn power OFF.

wWhile pushing and holding [16•9], turn power ON to enter Set mode.

eAfter the display appears, release [16•9].

rRotate [DIAL] to select the desired item, push [DIAL•ENTER].

tRotate [DIAL] to select the desired condition of the item. y Push [CLR], or rotate [DIAL] to select “Exit,” then push

[DIAL•ENTER] to exit set mode and returns to normal op- eration condition.

•SET MODE CONSTRUCTION

--Set Mode--

		˘Scan Type
	Rotate	Scan Timer
	Rotate	WX Alert
		WX Alert
		Dual/Tri
		Beep
		Contrast
		Foghorn Frequency
		Radio Power
		Scrambler Type
		Scrambler Code
		Exit

SET MODE 8

■Set mode items

DScan type

The transceiver has 2 scan types: Normal scan and Priority scan. Normal scan searches all TAG channels in the selected channel group. Priority scan searches all TAG channels in se- quence while monitoring Channel 16.

--Set Mode--

	Scan Type
	Priority
	Priority	7
	˘Normal	7


		8
	<ENT˘OK>

Default: Normal

DScan resume timer

The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until the signal disappears. When ON is selected, the scan pauses 5 sec. and resumes even if a signal has been re- ceived on any other channel than Channel 16.

--Set Mode-- Scan Timer

ON

˘OFF

<ENT˘OK>

Default: OFF

55

Image 61

Contents IM504 May occur Word DefinitionEquipment damage may occur Personal injury, ﬁre or electric shockCase of Emergency Iii Determining MPE RadiusTable of Contents Precautions Radio license for boaters U.S.A. only Operating RulesShip Station License OPERATOR’S LicenseFront panel Panel Description2TRANSMIT Power KEY H/L Function display 0TIME Zone Indicator2SCAN Indicator 1POSITION IndicatorMicrophone Channel selection Basic OperationChannel Channel 9 Call channelWeather channels S.A., international and Canadian channelsC to change the channel group, if necessary Rotate Dial to select a channelReceiving and transmitting While pushing and holding Call channel programmingPush CH/WXDUAL Microphone Lock function Channel commentsDisplay backlight Select the desired characActivating the scrambler Programming scrambler codes Optional voice scrambler operationDialenter Scan types Scan OperationPriority Scan Normal ScanClearing or setting all tagged channels Setting TAG channelsStarting a scan Description DUALWATCH/TRI-WATCHOperation DUALWATCH/TRI-WATCH SimulationMmsi code programming DSC OperationRotate Dial to select Mmsi Check, push Dialenter Rotate Dial to set the speciﬁc 9-digit Mmsi codeCheck the 9-digit Mmsi DSC self ID code Mmsi code checkProgramming Individual ID DSC address IDRotate Dial to select AddINDV ID, push Dialenter Rotate Dial to set the individual ID and ID nameRotate Dial to select Delindv ID, push Dialenter Deleting Individual IDRotate Dial to select the desired ID name for deleting Rotate Dial to select AddGroup ID, push Dialenter Programming Group IDRotate Dial to set the group ID and ID name Rotate Dial to select DELGroup ID, push Dialenter Deleting Group IDPosition and time programming GPS information indication Position and time indicationSimple call Distress callAfter 2 sec. Wait ACK Regular call Distress alert contains defaultPush Distress for 5 sec. to transmit the distress call Transmitting an individual call Transmitting DSC callsPush Dialenter to transmit the individual call Transmitting an individual acknowledgement Transmitting a group call Push Dialenter to transmit the group call Rotate Dial to select the desired category, push Dialenter Transmitting an all ships callPush Dialenter to transmit the all ships call Transmitting a position request call Push Dialenter to transmit the position request call Transmitting a position report call Push Dialenter to transmit the position report call Push Dialenter to transmit the polling request call Transmitting a polling request callTransmitting a position request reply call Your position data is transmitted, when Dialenter is pushed Transmitting a position report reply call Transmitting a polling request reply call Receiving a distress call Receiving DSC callsReceiving a distress acknowledgement Receiving a distress relay callReceiving a group call Receiving an individual callReceiving an all ships call Receiving a position request call Receiving a geographical area callReceiving a position report call Receiving a position request reply call Receiving a polling request callReceiving a position report reply call Receiving a polling request reply callDistress message Received messagesRotate Dial to select Distress, push Dialenter Rotate Dial to scroll the messageRotate Dial to select Other, push Dialenter Other messagesNo offset time default DSC Set modeRotate Dial to select Offset Time, push Dialenter Rotate Dial to select Auto ACK, push Automatic acknowledgementPush Dialenter to set the condition Rotate Dial to select Nmea Output, push Dialenter Nmea OutputIntercom operation Other FunctionsHM-162 listener RX Speaker function Hailer operation Push Hailrx to enter hailer modeTo return to normal operation, push CLR or Hailrx Underway Automatic foghorn functionStop SailTion is interrupted with an automatic return to the trans Rotate Dial to adjust the foghorn level, push DialenterIng DSC calls.’ p Set mode programming SET ModeSet mode items Scan resume timerDual/Tri-watch Weather alertBeep tone LCD contrastAutomatic foghorn frequency Radio powerScrambler type Scrambler code0DC Power Connector Connections and MaintenanceConnections Supplied accessories Fuse replacementAntenna Mounting the transceiver Using the supplied mounting bracketTighten the end bolts on the clamps rotate clockwise so MB-75 installationThat the clamps press firmly against the inside UT-112/UT-98 installation Return the cables and screws to the original position HM-162/HM-157 installationHM-162 Completed installation should look like thisHM-157 HM-162 HM-157Gasket Mm 131⁄32˝ Nut Cap Problem Possible Cause Solution TroubleshootingSpeciﬁcations Specifications and OptionsGeneral Receiver TransmitterOptions DimensionsFor mounting the transceiver to a panel 20 feet microphone extension cable for optional HMTransmit Receive Channel ListR12 Max TemplateUnit mm inch Cut here Page Memo Kamiminami, Hirano-ku, Osaka 547-0003, Japan