Icom IC-M504 Programming Group ID, Rotate Dial to select AddGroup ID, push Dialenter

DProgramming Group ID

qPush [MENU] to enter the DSC menu.

wRotate [DIAL] to select “Set up,” push [DIAL•ENTER].

--DSC Menu-- Select Item

Position Report Polling Request Received Calls Distress Setting

˘Set up Exit

eRotate [DIAL] to select “Add:Group ID,” push [DIAL•ENTER].

--DSC Menu-- Set up

Add:INDV ID

˘Add:Group ID

DEL:INDV ID

DEL:Group ID

Offset Time

MMSI Check

DSC OPERATION	6
r Rotate [DIAL] to set the group ID and ID name.
• The group ID is a unique number that you create for your group.
The ID name is an associated text name for that group.
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Push [CLR] to cancel and return to the set up menu.
• “Full ID” appears when 100 DSC address IDs are already
set.
		6
• After entering an 8-digit ID code, push [DIAL•ENTER] or [16•9]

to enter a 10-character ID name.

• 1st digit ‘0’ is fixed for a group ID.

--DSC Menu-- Add:Group ID Input 8 digits

0________

Input name

_________

<CLR˘Exit / ENT˘OK>

tAfter inputting, push [DIAL•ENTER] to program.

yPush [CLR] or rotate [DIAL] to select “Exit,” push [DIAL•ENTER].

•Returns to the DSC menu.

•Repeat again to return to the normal operation condition.

19