First Alert FA1220CV Checking for Open Zones, Using Ready Key, To show faulted zones

Page 13

Technical Manuals

Using the ✱

READY Key

CHECKING FOR OPEN ZONES

Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not Ready" message. Pressing the READY key will display all zones that are faulted, making it easier for you to secure any open zones.

Online! -

To show faulted zones:

DISARMED - PRESS

✴TOSHOWFAULTS

Note: Some keypads light a green LED when the system is ready. If not lit, the system is not ready to be armed.

READY

http://www.

1. Do not enter security code, but simply press	✱	.

	FAULT 05 FRONT	Typical fault display
	UPSTAIRS BEDROOM	Typical fault display
	UPSTAIRS BEDROOM

tech-man.com

2.

DISARMED

READY TOARM

Secure or bypass the zones displayed before arming the system. The "Ready" message will be displayed † when all protection zones have been either closed or bypassed.

†NOTE: All or part of this message may be replaced by a customized message programmed by the installer. Bear this in mind whenever the instructions indicate that the "DISARMED" or "READY" message will be displayed.

– 13 –

Image 13

Contents Users Guide Table of Contents General Partitioned System Zones System OverviewArming Features For Each Arming Mode System Overview System Overview General About the KeypadsAlpha Keypad Fixed-Word Keypad 0000 Online OFF Functions of the KeypadTechnical Manuals Online General Information ENTRY/EXIT DelaysPartition To show faulted zones Using Ready KeyChecking for Open Zones Displaying ALL Zone Descriptors Bypassing Protection Zones Using Bypass KeyTo bypass zones, the system must be disarmed first Enter your security code and pressQuick Bypass To use the Quick Bypass featureDisplaying Bypassed Zones Arming Perimeter only Using Stay keyUsing Instant Key With Entry Delay OFFArming ALL Protection Using Away KeyUsing Maximum Key Using the 1 OFF Key Memory of Alarm Disarming and Silencing AlarmsTo disarm the system and silence burglary or fire alarms General Using the KeyswitchUsing Key Chime ModeMESSAGE. Press For 5 Secs Viewing Central Station MessagesActive Panic Functions Panic KeysKeys Zone Function Information Security Codes & Authority LevelsDuress Code Quick ArmingSecurity Codes & Authority Levels Authority Levels General Rules onChanges To Exit User EditEnter Master or Manager code and press To Add a UserTo Add a User Limited Use User #84 CommandTo Delete a User To Change a Users CodeTo Goto another partition using an alpha keypad Accessing Other PartitionsGeneral Information Defining Executing Speed Key MacrosUsing #70 Relay Menu Mode Select the partition FA1220CV Event Logging ProceduresTo Exit the Event Log Press at any time FA1220CV Event Logging ProceduresUsing Test Key Testing the SystemSystem Testing YourTypical Check Displays Trouble ConditionsServicing Information Silencing a Fire AlarmSmoke Detectors for Minimum Protection Emergency Evacuation Steps to SafetyMaintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary UL Notice This is a Grade a system Federal Communications Commission FCC Part 15 StatementFederal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä