First Alert FA1220CV technical manual To Change a Users Code, To Delete a User

Page 31

Technical

SECURITY CODES & AUTHORITY LEVELS

Manuals

To Change a User's Code

1.Enter Master/Manager code and press the

2.Enter the new code for that user.

CODE

8

key + user number to be changed.

Online! - http://www

ADDNEWUSER? 0 = NO,1 = YES

USER 02 CHANGED SUCCESSFULLY

The system will recognize that the user number is already in use and will prompt whether or not this is a new user. Enter 0 to change the user's code to the code entered in step 2.

The system confirms that the change is allowed based on authorization level, and if so, puts the new code into effect.

Note that if changing one’s own code, the system will prompt for the new code to be reentered. This prevents accidentally changing a high level code.

CODE

.tech

To Delete a User

1.	Enter the Master or Manager code and press the	8 key + User Number to be
	deleted.
2.	Enter the same Master or Manager code again.

-man.com

OK TO DELETE

0 = NO,1 =YES

USER CODE

DELETED

The system will recognize that the user number is already in use and will prompt to confirm that it should be deleted. Press 0 (NO) or 1 (YES).

If yes, that user's code is removed from all partitions to which it was assigned, and all authority levels and other information about that user is deleted. Note that a user can only be deleted from the partition in which it was first assigned, and can only be deleted by a user with a higher authority level. A User's security code cannot be deleted by oneself.

– 31 –

Image 31

Contents Users Guide Table of Contents General Partitioned System Zones System OverviewArming Features For Each Arming Mode System Overview System Overview General About the KeypadsAlpha Keypad Fixed-Word Keypad 0000 Online OFF Functions of the KeypadTechnical Manuals Online General Information ENTRY/EXIT DelaysPartition To show faulted zones Using Ready KeyChecking for Open Zones Displaying ALL Zone Descriptors Enter your security code and press Using Bypass KeyBypassing Protection Zones To bypass zones, the system must be disarmed firstQuick Bypass To use the Quick Bypass featureDisplaying Bypassed Zones Arming Perimeter only Using Stay keyUsing Instant Key With Entry Delay OFFArming ALL Protection Using Away KeyUsing Maximum Key Using the 1 OFF Key Memory of Alarm Disarming and Silencing AlarmsTo disarm the system and silence burglary or fire alarms General Using the KeyswitchUsing Key Chime ModeMESSAGE. Press For 5 Secs Viewing Central Station MessagesActive Panic Functions Panic KeysKeys Zone Function Quick Arming Security Codes & Authority LevelsInformation Duress CodeSecurity Codes & Authority Levels To Exit User Edit General Rules onAuthority Levels ChangesEnter Master or Manager code and press To Add a UserTo Add a User Limited Use User #84 CommandTo Delete a User To Change a Users CodeTo Goto another partition using an alpha keypad Accessing Other PartitionsGeneral Information Defining Executing Speed Key MacrosUsing #70 Relay Menu Mode Select the partition FA1220CV Event Logging ProceduresTo Exit the Event Log Press at any time FA1220CV Event Logging ProceduresUsing Test Key Testing the SystemSystem Testing YourTypical Check Displays Trouble ConditionsServicing Information Silencing a Fire AlarmSmoke Detectors for Minimum Protection Emergency Evacuation Steps to SafetyMaintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary UL Notice This is a Grade a system Federal Communications Commission FCC Part 15 StatementFederal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä