Technical Manuals Online!
General
Information
NOTE: Using #70 Menu Mode requires an alpha keypad.
USING #70 RELAY MENU MODE
Your system may be set up so that certain lights or other devices can be turned on or off by using the #70 command from either a keypad or a telephone keypad (if phone module is used). Ask your installer if this has been done in your system.
To activate relays from a keypad, enter
To activate relays using the telephone (if phone module is used), first dial the
- http://www
ENTER DEVICE NO.
00=QUIT 01
Voice: "ENTER DEVICE CODE NOW"
Enter the
Note that if an invalid number is entered, the system will simply ask you to reenter the number.
NNDEVICE IS OFF HIT 0=OFF , 1=ON
NNDEVICE IS OFF HIT THE "*" KEY
Voice: "voice descriptor DEVICE nn ON/OFF. FOR voice descriptor ON ENTER 1, FOR voice descriptor OFF ENTER 0"
Press 0 or 1 to turn the device off or on respectively.
"nn" represents the
Voice: "voice descriptor DEVICE nn ON/OFF. TO EXIT ENTER 00 NOW"
From a keypad, press [✽] to continue. The ENTER DEVICE NO. prompt will appear.
From a telephone keypad, enter 00 to exit, or enter the next relay number to be programmed. The current on/off state of that relay will be annunciated as described above. Alternatively, if 6 seconds elapses with no key depression, the voice module will annunciate the "ENTER DEVICE CODE NOW" message.
– 34 –