First Alert FA1220CV technical manual Testing Your, System

Page 38

Technical Manuals Online! - http://www.tech-man.com

		TESTING THE SYSTEM
		(Continued)
Testing Your	1. Open and close each protected door and window in turn and listen for three beeps. The
System		identification of each faulted protection point should appear on the display.
	2.	Walk in front of any interior motion detectors (if used) and listen for three beeps as
		movement is detected. The identification of the detector should appear on the display when
		it is activated.
		NOTE: Wireless motion detectors activate only once in a 3-1/2 minute period to conserve
		battery life.
	3.	Follow the manufacturer's instructions to test all smoke detectors to ensure that all are
		functioning properly. The identification of each detector (or the zone number of the zone
		assigned to the detector) should appear on the display when each is activated.
	4.	When all protection points have been checked, there should be no zone identification
		numbers displayed. If a problem is experienced with any protection point (no confirming
		sounds, no display), CALL FOR SERVICE IMMEDIATELY.
	5.	Turn off Test mode by entering the security code and pressing the OFF key.

– 38 –

Image 38

Contents Users Guide Table of Contents System Overview General Partitioned System ZonesArming Features For Each Arming Mode System Overview System Overview Alpha Keypad Fixed-Word Keypad About the KeypadsGeneral 0000 Online Functions of the Keypad OFFTechnical Manuals Online Partition ENTRY/EXIT DelaysGeneral Information Checking for Open Zones Using Ready KeyTo show faulted zones Displaying ALL Zone Descriptors To bypass zones, the system must be disarmed first Using Bypass KeyBypassing Protection Zones Enter your security code and pressDisplaying Bypassed Zones To use the Quick Bypass featureQuick Bypass Using Stay key Arming Perimeter onlyWith Entry Delay OFF Using Instant KeyUsing Away Key Arming ALL ProtectionUsing Maximum Key To disarm the system and silence burglary or fire alarms Disarming and Silencing AlarmsUsing the 1 OFF Key Memory of Alarm Using the Keyswitch GeneralChime Mode Using KeyViewing Central Station Messages MESSAGE. Press For 5 SecsKeys Zone Function Panic KeysActive Panic Functions Duress Code Security Codes & Authority LevelsInformation Quick ArmingSecurity Codes & Authority Levels Changes General Rules onAuthority Levels To Exit User EditTo Add a User Enter Master or Manager code and pressLimited Use User #84 Command To Add a UserTo Change a Users Code To Delete a UserAccessing Other Partitions To Goto another partition using an alpha keypadSpeed Key Macros General Information Defining ExecutingUsing #70 Relay Menu Mode FA1220CV Event Logging Procedures Select the partitionFA1220CV Event Logging Procedures To Exit the Event Log Press at any timeTesting the System Using Test KeyTesting Your SystemTrouble Conditions Typical Check DisplaysServicing Information Alarm Silencing a FireSmoke Detectors for Minimum Protection Steps to Safety Emergency EvacuationMaintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary Federal Communications Commission FCC Part 15 Statement UL Notice This is a Grade a systemFederal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä