First Alert FA1220CV technical manual Bypassing Protection Zones, Using Bypass Key

Page 15

Technical

BYPASSING PROTECTION ZONES

Manuals Online! - http://www.tech-man

Using the 6

BYPASS Key

This key is used when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. All bypasses are removed when an OFF sequence (security code plus OFF) is performed. Bypasses are also removed if the arming procedure that follows the bypass command is not successful.

Note: The system will not allow fire or emergency zones (keypad panics A, B, C) to be bypassed.

To bypass zones, the system must be disarmed first.

(Your system may include special high security zones. If so, these zones can be bypassed while the system is armed or disarmed. Ask your installer if your system has these zones.)

	BYPASS
1. Enter your security code and press	6	.

2.Enter zone number(s) for the zones to be bypassed (e.g., 01, 02, 03, etc.).

Important! All single-digit numbers must be preceded by a zero (for example, enter 01 for zone 1).

.com

3.BYPASS 07 FRONT UPSTAIRSBEDROOM

Typical bypass message

4.DISARMEDBYPASS READY TOARM

When finished, the keypad will display the word BYPASS along with each bypassed zone number. Wait for these zones to be displayed before arming. Arming the system before bypassed zones are displayed eliminates all bypasses.

Arm the system as usual when the keypad displays "ready" to arm message.

– 15 –

Image 15

Contents Users Guide Table of Contents General Partitioned System Zones System OverviewArming Features For Each Arming Mode System Overview System Overview About the Keypads GeneralAlpha Keypad Fixed-Word Keypad 0000 Online OFF Functions of the KeypadTechnical Manuals Online ENTRY/EXIT Delays General InformationPartition Using Ready Key To show faulted zonesChecking for Open Zones Displaying ALL Zone Descriptors Enter your security code and press Using Bypass KeyBypassing Protection Zones To bypass zones, the system must be disarmed firstTo use the Quick Bypass feature Quick BypassDisplaying Bypassed Zones Arming Perimeter only Using Stay keyUsing Instant Key With Entry Delay OFFArming ALL Protection Using Away KeyUsing Maximum Key Disarming and Silencing Alarms Using the 1 OFF Key Memory of AlarmTo disarm the system and silence burglary or fire alarms General Using the KeyswitchUsing Key Chime ModeMESSAGE. Press For 5 Secs Viewing Central Station MessagesPanic Keys Active Panic FunctionsKeys Zone Function Quick Arming Security Codes & Authority LevelsInformation Duress CodeSecurity Codes & Authority Levels To Exit User Edit General Rules onAuthority Levels ChangesEnter Master or Manager code and press To Add a UserTo Add a User Limited Use User #84 CommandTo Delete a User To Change a Users CodeTo Goto another partition using an alpha keypad Accessing Other PartitionsGeneral Information Defining Executing Speed Key MacrosUsing #70 Relay Menu Mode Select the partition FA1220CV Event Logging ProceduresTo Exit the Event Log Press at any time FA1220CV Event Logging ProceduresUsing Test Key Testing the SystemSystem Testing YourTypical Check Displays Trouble ConditionsServicing Information Silencing a Fire AlarmSmoke Detectors for Minimum Protection Emergency Evacuation Steps to SafetyMaintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary UL Notice This is a Grade a system Federal Communications Commission FCC Part 15 StatementFederal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä