Kenmore 153.335942, 153.335845 Installation Checklist, Before Lighting the Pilot, Temperature

Page 20

Installation Instructions (cont'd)

Installation Checklist

BEFORE LIGHTING THE PILOT:

VENT PIPETO OUTDOORS

Check the gas lines for leaks.

a. Use a soapy water solution• DO NOT test for gas leaks usinga match or open flame.

b. Brush the soapy water solution on all gas pipes, joints and fittings.

c. Check for bubbling soap. This means you have a leak.

Turn "OFF" gas and make the necessary repairs. d. Recheck for leaks.

e. Rinse off soapy solution and wipe dry.

• Is the new temperature-pressure relief valve properly installed

and piped to an adequate dram. See Temperature-Pressure Relief Valve" section.

• Are the cold and hot water lines connected to the water

heater correctly? See "Water Piping" instructions in the "Installing the New Water Heater" section•

HOT

COLD

SHUTOFF

VALVE

TEMPERATURE-

PRESSURERELIEF

VALVE

•Is the water heater completely filled w'th water? See "Filling'

instructions in the "Installing the New Water Heater" sec-

tion.

DISCHARGE PIPE

 

(Do not cap or plug)

•Will a water leak damage anything? See the "Locating the New Water Heater" section.

•is there proper clearance between the water heater and any-

thing that might catch fire? See the "Locating the New water

GASSUPPLY

Heater" section.

 

•Do you have adequate ventilation so that the water heater

will operate properly? See "Combustion Air and Ventilation"

in the "Locat'ng the New Water Heater' section•

SHUTOFFVALVE-

•Is the draft hood vent piping properly secured? See "Venting" "nstructions "n the "Installing the New Water Heater sec- tion.

•Is there proper clearance between the vent pipe and anything that might catch on fire? See "Venting" instructions in the "Installing the New Water Heater" section.

(Sediment trap)

PIPECAI

•Is the vent pipe properly sloped and does the vent terminate

outdoors? See "Venting" instructions in the "Installing the New Water Heater" section.

•Do you need to call your gas company to check the gas pipe and its hookup?

_0

 

ANS

_1.10

--

I

I

I

 

 

MA;_,I_4 _IllGSTATIC

 

G_r_ p_ESBURE

_ W.C

mm

I;,xx. t_UT

WN. O_T

m

 

I_$_i_

W_C_

W_O_

W_C_

MODEL RATING PLATE

2O

Page 19 Page 21
Image 20
Page 19 Page 21
Contents For Your Safety AN Odorant is Added to the GAS Used by this Water HeaterWhat to do if YOU Smell GAS Model NoSafety Precautions AGE AwarningAwarning Safety Precautions Must be propContents Product Specifications Customer ResponsibilitiesWhen Sweat Soldering Materials and Basic Tools NeededMaterials Needed Basic ToolsInstallation Instructions Removing the Old Water HeaterOr Property Damage Installation InstructionsLocating the New Water Heater Installation Instructions contd Venting ClearancesCombustiblematerialwill resultin a fire hazard Property DamageENT to Installation Completed Using Sears Installation KIT Water PipingInstallation Instructions contd Temperature-Pressure Relief ValveWiring USE with Power CordUSE Without Power Cord Filling the Water HeaterUSE Without Power Cord contd Wiring DiagramVenting Vent pipe from the water heater must be I/4 inch perVenting System Example Installations For ALL Models Venting contdHill PVC Schedule 40 Vent PipingVenting System Example Installations for ALL Models contd PrecautionsScEw Connecting PVC, ABS or Cpvc Pipe Vent to BlowerInstallation Showing USE of PVC, ABS or Cpvc Pipe GAS Piping with Flexible Connector Gas PipingHe appliance and its gas connection must be leak tested Sediment TrapInstallation Checklist TemperatureBefore Lighting the Pilot Model Rating PlateOperating Instructions Before the Water Heater will OperateLighting Before Lighting Propane L,P. GAS WaterTHERMOCOUPLEP,LOTBURNER Operating Instructions contdWhatto Doif Yousmellgas Temperature Regulation Service and Adjustment Service and Adjustment contd Gas Control Valve & Burner Assembly Replacement InformationTemperature-Pressure Relief DrainingDrain Valve Washer Replacement ServiceHousekeeping WasherThermal Expansion Troubleshooting GuideStart Up Conditions Troubleshooting Guide contd CondensationSMOKE/ODOR Smelly WaterHigh Temperature Shut OFF System Operational Conditions contdAIR in HOT Water Faucets Not Enough or no HOT WaterTroubleshooting Guide contd Leakage CheckpointsThermostat and GAS Supply Check IwarningiDiagram for Electrical System Check on pages 34 Swc...,cElectrical System Check Use diagram on Thec#togrouod/r110,I-.- Isindicator,20 o,tshtooI Parts Order List Model NumbersParts Order List contd 153.335816 40 GalPower Miser TM 9 Power Vent GAS Water Heaters Parts Order ListPower Miser TM 9 Power Vent GAS Water Heaters Model Numbers Parts Order List contdWarranty About Your Warranty
Related manuals
Manual 40 pages 985 b

153.335862, 153.335942, 153.335916, 153.335962, 153.335845 specifications

The Kenmore 153 series, comprising models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, is renowned for its innovative design and exceptional performance in household appliances. These models are predominantly known for their washing machines and dryers, which have become staples in modern homes.

One of the standout features of the Kenmore 153 series is its advanced wash technology. Each model incorporates a high-efficiency system designed to reduce water consumption while maximizing cleaning power. The patented triple-action agitator ensures thorough cleaning by moving clothes in multiple directions, providing better agitation and fabric care. This technology not only ensures a deeper clean but also helps in preserving the integrity of fabrics over time.

Energy efficiency is another hallmark of the Kenmore 153 series. Many models are ENERGY STAR certified, which means they meet stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy. This leads to significant cost savings over time, making them a smart choice for eco-conscious consumers looking to reduce their environmental footprint.

The Kenmore 153 series also emphasizes user-friendly features. With intuitive control panels and easy-to-read displays, these machines make laundry tasks simpler. Some models include a variety of customizable wash cycles, allowing users to select the optimal settings for different types of fabrics and soil levels. The quick wash and dryer cycles are particularly beneficial for those with busy lifestyles, reducing the time spent on laundry.

Noise reduction technology is another advantage. The Kenmore 153 series is designed with sound-dampening materials and features that minimize operational noise, making them ideal for homes where quiet is preferred, such as during nighttime laundry routines.

In terms of build quality, these models are constructed with durable materials aimed at longevity and reliability. Users can expect years of dependable service, with many designs offering warranties to back their durability claims.

In conclusion, the Kenmore 153 series, including models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, encapsulates a blend of advanced laundry technologies, energy efficiency, user-friendly features, and robust build quality. These attributes make them a valuable addition to any household, simplifying the laundry process while delivering excellent results.
Top Page Image Contents