Kenmore 153.335942, 153.335845, 153.335962, 153.335862, 153.335916 owner manual Service and Adjustment

Page 25

Service and Adjustment

Tank (Sediment) Cleaning

Sediment build-up on the tank bottom may create varying amounts of noise, and if leiCtin the tank will cause premature tank failure. In some

water areas, you may not be able to drain all sediment deposits by simply draining the tank. In these cases Mag Erad (part no. 23600) can be used to help remove the sediment deposits. This may be ordered from the Sears Service Center. For ordering, refer to the "Repair Parts" section.

Venting System Inspection

At least once a year a visual inspection should be made of the venting system. You should look for:

Obstructions which could cause improper venting. The com- bustion and ventilation air flow must not be obstructed.

Damage or deterioration which could cause improper venting or leaka[_eof combustion products.

Rusted i-lakesaround top of water heater.

AWARNING

Chemical vapor corrosionof the flue and vent system may occur if air for combustioncontainscertain chemicalvapors. Spray can propellants,cleaningsolvents,refrigerator and air conditioner refrigerants, swimming pool chemicals,calcium and sodiumchloride,waxes,bleach,and processchemicalsare typicalcompoundswhicharepotentially corrosive.

Burner Inspection

AWARNING[

Do not usethisapplianceif anypart of it hasbeenunderwater.[

Immediately call a SearsService Technicianto inspectthe [ applianceand to replace the gas control or any part of the

burnersystemwhichhasbeenunderwater.

At least once a year a visual inspection should be made of the main burner and pilot burner. The drawing is for your reference.

You should check for sooting which is not normal and will impair proper combustion.

AWARNING[

Soot build-up indicatesa problem that requires correction [ before further use. Turn "off" gasto water heater and leave[ "off" until repairs are made, becausefailure to correct the causeof the sootingcan result in a Ere or explosioncausing[

death,seriousbodilyinjury,or propertydamage.

[

AWARNING

Obstructed or deterioratedventsystemsmaypresenta serious healthrisk or asphyxiation.

Burner Cleaning

AWARNING[ Be sure the vent piping is properly connected to prevent [ escapeof dangerousflue gasses which could cause deadly

asphyxat on.

AWARNING[

If after inspectionof the vent system you found sootingor [ deterioration,somethingiswrong.Call the localgasutility to correctthe problemand cleanor replace the flue and venting

beforeresum ng operationof the water heater.

In the event your burner needs cleaning, use the following instructions:

If inspection of the burner shows that cleaning is required, turn

the gas control knob clockwise (f"_)

to the "OFF" position,

depressing slightly.

 

NOTE: The knob cannot be turned from "PILOT" to "OFF"

unless knob is depressed slightly. DO NOT FORCE.

Loose deposits on or around the burner can be removed by care-

fully using the hose of a vacuum cleaner inserted through the access door of the water heater. If the burner needs to be removed

for additional cleaning, call the Sears Service Center to remove

and clean the burner and correct the problem that required the burner to be cleaned.

Oiling Instructions

Oil motor every 12 months with 6 drops of SAE 20 motor oil (Fasco motor only).

25

Image 25
Contents AN Odorant is Added to the GAS Used by this Water Heater For Your SafetyWhat to do if YOU Smell GAS Model NoSafety Precautions Awarning AwarningAGE Must be prop Safety PrecautionsContents Customer Responsibilities Product SpecificationsMaterials and Basic Tools Needed When Sweat SolderingMaterials Needed Basic ToolsRemoving the Old Water Heater Installation InstructionsLocating the New Water Heater Installation InstructionsOr Property Damage Venting Clearances Installation Instructions contdCombustiblematerialwill resultin a fire hazard Property DamageENT to Water Piping Installation Completed Using Sears Installation KITTemperature-Pressure Relief Valve Installation Instructions contdUSE with Power Cord WiringUSE Without Power Cord Filling the Water HeaterWiring Diagram USE Without Power Cord contdVenting Vent pipe from the water heater must be I/4 inch perVenting contd Venting System Example Installations For ALL ModelsHill PVC Schedule 40 Vent PipingPrecautions Venting System Example Installations for ALL Models contdInstallation Showing USE of PVC, ABS or Cpvc Pipe Connecting PVC, ABS or Cpvc Pipe Vent to BlowerScEw Gas Piping GAS Piping with Flexible ConnectorHe appliance and its gas connection must be leak tested Sediment TrapTemperature Installation ChecklistBefore Lighting the Pilot Model Rating PlateBefore the Water Heater will Operate Operating InstructionsBefore Lighting Propane L,P. GAS Water LightingWhatto Doif Yousmellgas Operating Instructions contdTHERMOCOUPLEP,LOTBURNER Temperature Regulation Service and Adjustment Gas Control Valve & Burner Assembly Replacement Information Service and Adjustment contdTemperature-Pressure Relief DrainingService Drain Valve Washer ReplacementHousekeeping WasherStart Up Conditions Troubleshooting GuideThermal Expansion Condensation Troubleshooting Guide contdSMOKE/ODOR Smelly WaterOperational Conditions contd High Temperature Shut OFF SystemAIR in HOT Water Faucets Not Enough or no HOT WaterLeakage Checkpoints Troubleshooting Guide contdIwarningi Thermostat and GAS Supply CheckSwc...,c Diagram for Electrical System Check on pages 34Electrical System Check Use diagram on Thec#togrouod/r110,I-.- Isindicator,20 o,tshtooI Model Numbers Parts Order List153.335816 40 Gal Parts Order List contdParts Order List Power Miser TM 9 Power Vent GAS Water HeatersParts Order List contd Power Miser TM 9 Power Vent GAS Water Heaters Model NumbersAbout Your Warranty Warranty
Related manuals
Manual 40 pages 985 b

153.335862, 153.335942, 153.335916, 153.335962, 153.335845 specifications

The Kenmore 153 series, comprising models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, is renowned for its innovative design and exceptional performance in household appliances. These models are predominantly known for their washing machines and dryers, which have become staples in modern homes.

One of the standout features of the Kenmore 153 series is its advanced wash technology. Each model incorporates a high-efficiency system designed to reduce water consumption while maximizing cleaning power. The patented triple-action agitator ensures thorough cleaning by moving clothes in multiple directions, providing better agitation and fabric care. This technology not only ensures a deeper clean but also helps in preserving the integrity of fabrics over time.

Energy efficiency is another hallmark of the Kenmore 153 series. Many models are ENERGY STAR certified, which means they meet stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy. This leads to significant cost savings over time, making them a smart choice for eco-conscious consumers looking to reduce their environmental footprint.

The Kenmore 153 series also emphasizes user-friendly features. With intuitive control panels and easy-to-read displays, these machines make laundry tasks simpler. Some models include a variety of customizable wash cycles, allowing users to select the optimal settings for different types of fabrics and soil levels. The quick wash and dryer cycles are particularly beneficial for those with busy lifestyles, reducing the time spent on laundry.

Noise reduction technology is another advantage. The Kenmore 153 series is designed with sound-dampening materials and features that minimize operational noise, making them ideal for homes where quiet is preferred, such as during nighttime laundry routines.

In terms of build quality, these models are constructed with durable materials aimed at longevity and reliability. Users can expect years of dependable service, with many designs offering warranties to back their durability claims.

In conclusion, the Kenmore 153 series, including models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, encapsulates a blend of advanced laundry technologies, energy efficiency, user-friendly features, and robust build quality. These attributes make them a valuable addition to any household, simplifying the laundry process while delivering excellent results.