Kenmore 153.335845, 153.335942, 153.335962 Product Specifications, Customer Responsibilities

Page 6

Customer Responsibilities

Thank You for purchasing a Sears water heater. Properly installed and maintained, it should give you years of trouble free ser- vice. If you should decide that you want the new water heater profes- sionally installed by Sears call the local Sears Service Center or any

Sears store. They will arrange for prompt, quality installation by Sears authorized contractors.

Abbreviations Found In This Instruction Manual CSA - Canadian Standards Association

ANSI - American National Standards Institute NFPA - National Fire Protection Association

AWARNING

This gas-fired water heater is design certified by CSA

INTERNATIONAL under American National Standard/CSA Standard for Gas Water Heaters ANS

Z21.10.1 • CSA 4.1 (latest edition). The installation must conform with this manual, Local Codesand with the latest

edition of the National Fuel Gas Code, ANSI Z223. I.

This publication is availablefrom your local government or public library, gas company, or by writing NFPA, Batterymarch Park, Quincy, MA 02269.

•Read the "Safety Precautions" section, pages 2 and 3 of this manual first and then the entire manual carefully. If you don't follow the safety rules, the water heater will not operate prop-

erly. It could cause DEATH, SERIOUS BODILY INJURY

AND/OR PROPERTY DAMAGE.

This manual contains instructions for the installation, opera- tion, and maintenance of the gas-fired water heater. It also contains warnings through out the manual that you must read and be aware of. All warnings and all instructions are essential

to the proper operation of the water heater and your safety.

Since we cannot put everything on the first few pages, READ

THE ENTIRE MANUAL BEFORE ATTEMPTING TO INSTALL OR OPERATE THE WATER HEATER.

The installation must conform with the instructions in this

manual; [_as company rules; and Local Codes, or in the absence of Local Codes, with the latest edition of the National

Fuel Gas code, ANSI Z223.1, also referred to as NFPA 54. This publication is available from your local government or

public library or gas company or by writing NFPA, Batterymarch Park, Quincy, MA 02269.

If after reading this manual you have any questions or do not

understand any portion of the instructions, call the Sears Service Center.

Carefully plan the place where you are going to put the water heater. Correct combustion, vent action, and vent pipe instal- lation are very important in preventing death from possible carbon monoxide poisoning and fires.

Examine the location to ensure the water heater complies with the "Locating the New Water Heater" section in this manual. For California installation this water heater must be braced, anchored, or strapped to avoid falling or moving during an earthquake. See instructions for correct installation proce-

dures. Instructions may be obtained from your local dealer, wholesaler, public utilities or California Office of the State Architect, 400 P Street, Sacramento, CA 95814.

Complies with SCAQMD rule #1121 and districts having equivalent NOx requirements.

Product

Specifications

 

 

 

 

 

TANK

TYPE

 

RECOVERY

MINIMUM

DIMENSIONS IN INCHES

 

 

RATE GALS.

MODEL NUMBER

 

 

HEIGHTTO

CAPACITY

OF

B.ZU.

PER HOUR

VENT

 

 

IN GALLONS

GAS

RATE

@ 90°F RISE

PIPE

DIAMETER

JACKET TOP

153.335816

40

NATURAL

40,000

40.9

3"

18"

60"

153.335845

40

PROPANE

40,000

40.9

3"

18"

60"

153.335862

40

PROPANE

40,000

40.9

3"

18"

60"

153.335916

50

NATURAL

40,000

40.9

3"

20"

59_"

153.335942

50

PROPANE

40,000

40.9

3"

20"

59'/2"

153.335962

50

PROPANE

40,000

40.9

3"

20"

59'A"

Page 5 Page 7
Image 6
Page 5 Page 7
Contents What to do if YOU Smell GAS For Your SafetyAN Odorant is Added to the GAS Used by this Water Heater Model NoSafety Precautions Awarning AwarningAGE Safety Precautions Must be propContents Product Specifications Customer ResponsibilitiesMaterials Needed When Sweat SolderingMaterials and Basic Tools Needed Basic ToolsInstallation Instructions Removing the Old Water HeaterInstallation Instructions Locating the New Water HeaterOr Property Damage Combustiblematerialwill resultin a fire hazard Installation Instructions contdVenting Clearances Property DamageENT to Installation Completed Using Sears Installation KIT Water PipingInstallation Instructions contd Temperature-Pressure Relief ValveUSE Without Power Cord WiringUSE with Power Cord Filling the Water HeaterVenting USE Without Power Cord contdWiring Diagram Vent pipe from the water heater must be I/4 inch perHill Venting System Example Installations For ALL ModelsVenting contd PVC Schedule 40 Vent PipingVenting System Example Installations for ALL Models contd PrecautionsConnecting PVC, ABS or Cpvc Pipe Vent to Blower Installation Showing USE of PVC, ABS or Cpvc PipeScEw He appliance and its gas connection must be leak tested GAS Piping with Flexible ConnectorGas Piping Sediment TrapBefore Lighting the Pilot Installation ChecklistTemperature Model Rating PlateOperating Instructions Before the Water Heater will OperateLighting Before Lighting Propane L,P. GAS WaterOperating Instructions contd Whatto Doif YousmellgasTHERMOCOUPLEP,LOTBURNER Temperature Regulation Service and Adjustment Temperature-Pressure Relief Service and Adjustment contdGas Control Valve & Burner Assembly Replacement Information DrainingHousekeeping Drain Valve Washer ReplacementService WasherTroubleshooting Guide Start Up ConditionsThermal Expansion SMOKE/ODOR Troubleshooting Guide contdCondensation Smelly WaterAIR in HOT Water Faucets High Temperature Shut OFF SystemOperational Conditions contd Not Enough or no HOT WaterTroubleshooting Guide contd Leakage CheckpointsThermostat and GAS Supply Check IwarningiDiagram for Electrical System Check on pages 34 Swc...,cElectrical System Check Use diagram on Thec#togrouod/r110,I-.- Isindicator,20 o,tshtooI Parts Order List Model NumbersParts Order List contd 153.335816 40 GalPower Miser TM 9 Power Vent GAS Water Heaters Parts Order ListPower Miser TM 9 Power Vent GAS Water Heaters Model Numbers Parts Order List contdWarranty About Your Warranty
Related manuals
Manual 40 pages 985 b

153.335862, 153.335942, 153.335916, 153.335962, 153.335845 specifications

The Kenmore 153 series, comprising models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, is renowned for its innovative design and exceptional performance in household appliances. These models are predominantly known for their washing machines and dryers, which have become staples in modern homes.

One of the standout features of the Kenmore 153 series is its advanced wash technology. Each model incorporates a high-efficiency system designed to reduce water consumption while maximizing cleaning power. The patented triple-action agitator ensures thorough cleaning by moving clothes in multiple directions, providing better agitation and fabric care. This technology not only ensures a deeper clean but also helps in preserving the integrity of fabrics over time.

Energy efficiency is another hallmark of the Kenmore 153 series. Many models are ENERGY STAR certified, which means they meet stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy. This leads to significant cost savings over time, making them a smart choice for eco-conscious consumers looking to reduce their environmental footprint.

The Kenmore 153 series also emphasizes user-friendly features. With intuitive control panels and easy-to-read displays, these machines make laundry tasks simpler. Some models include a variety of customizable wash cycles, allowing users to select the optimal settings for different types of fabrics and soil levels. The quick wash and dryer cycles are particularly beneficial for those with busy lifestyles, reducing the time spent on laundry.

Noise reduction technology is another advantage. The Kenmore 153 series is designed with sound-dampening materials and features that minimize operational noise, making them ideal for homes where quiet is preferred, such as during nighttime laundry routines.

In terms of build quality, these models are constructed with durable materials aimed at longevity and reliability. Users can expect years of dependable service, with many designs offering warranties to back their durability claims.

In conclusion, the Kenmore 153 series, including models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, encapsulates a blend of advanced laundry technologies, energy efficiency, user-friendly features, and robust build quality. These attributes make them a valuable addition to any household, simplifying the laundry process while delivering excellent results.
Top Page Image Contents