Kenmore 153.335845, 153.335942, 153.335962, 153.335862, 153.335916 owner manual ENT to

Page 11

Installation Instructions (cont'd)

Combustion Air and Ventilation

for Appliances Located in Unconfined Spaces

Unconfined Space is a space whose volume is not less than 50 cubic feet per 1,000 Btu per hour of the aggregate input rating of all appli- ances installed in that space. Rooms communicating directly with the space in which the appliances are installed, through openings not fur- nished with doors, are considered a part of the unconfined space.

In unconfined spaces in buildings, infiltration may be adequate to provide air for combustion, ventilation and dilution of flue gases. However, in buildings of tight construction (for example, weather stripping, heavily insulated, caulked, vapor barrier, etc.), additional air may need to be provided using the methods described in Combustion Air and Ventilation for Appliances Located in Confined Spaces.

Combustion Air and Ventilation for Appliances Located in Confined Spaces

Confined Space is a space whose volume is less than 50 cubic feet per 1,000 Btu pet hour of the aggregate input rating of all appliances

installed in that space.

a. ALL AIR FROM INSIDE BUILDINGS: (See Page 9 Figure 1, and Figure 5 below)

The confined space shall be provided with two permanent open- ings communicating directly with an additional room(s) of suffi- cient volume so that the combined volume of all spaces meets the criteria for an unconfined space. The total input of all gas utiliza- tion equipment installed in the combined space shall be considered in making this determination. Each opening shall have a minimum free area of one square inch per 1,000 BTU per hour of the total input rating of all gas utilization equipment in the confined space, but not less than 100 square inches. One opening shall commence within 12 inches of the top and one commencing within 12 inches of the bottom of the enclosure.

1.When directly communicating with the outdoors, each opening shall have a minimum free area of 1 square inch per 4,000 BTU _er hour of total input rating of all equipment in the enclosure. See Figure 6.)

2.When communicating with the outdoors through vertical ducts, each opening shall have a minimum free area of 1 square inch pet 4,000 BTU per hour of total input rating of all equipment in the enclosure. (See Figure 7.)

Figure 7 ]

3.When communicating with the outdoors through horizontal ducts, each openingshall have a minimum free area of 1 square inch per 2,000 BTU per hour of total input rating of all equip- ment in the enclosure. (See Figure 8.)

_ENT TO

b. ALL AIR FROM OUTDOORS: (see Figures 6-8)

The confined space shall be provided with two permanent open- ings, one commencing within 12 inches of the top and one com- mencing within 12 inches from the bottom of the enclosure. The openings shall communicate directly, or by ducts, with the

outdoors or spaces (crawl or attic) that freely communicate with the outdoors.

Figure 6 ]

I Figure 8 ]

4.When ducts are used, they shall be of the same cross-sectional area as the free area of the openings to which they connect. The mini- mum short side dimension of rectangular air ducts shall not he less than 3 inches. (See Figure 8.)

5.Louvers and Grilles: In calculating free area, consideration shall be given to the blocking effect of louvers, grilles or screens protect- ing openings. Screens used shall not be smaller than ¼ inch mesh. If the free area through a design of louver or grille is known, it should be used in calculating the size opening required to provide the free area specified. If the design and free area is not known, it may be assumed that wood louvers will be 20-25 percent free area and metal louvers and grilles will have 60-75 percent free area. Louvers and grilles shall be fixed in the open position or inter- locked with the equipment so that they are opened automatically during equipment operation.

6.Special Conditions Created by Mechanical Exhausting or Fireplaces: Operation of exhaust fans, ventilation systems, clothes dryers or fireplaces may create conditions requiring special atten-

tion to avoidunsatisfactory operation of installed gas utilization equipment.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No For Your SafetyAN Odorant is Added to the GAS Used by this Water Heater What to do if YOU Smell GASSafety Precautions AGE AwarningAwarning Must be prop Safety PrecautionsContents Customer Responsibilities Product SpecificationsBasic Tools When Sweat SolderingMaterials and Basic Tools Needed Materials NeededRemoving the Old Water Heater Installation InstructionsOr Property Damage Installation InstructionsLocating the New Water Heater Property Damage Installation Instructions contdVenting Clearances Combustiblematerialwill resultin a fire hazardENT to Water Piping Installation Completed Using Sears Installation KITTemperature-Pressure Relief Valve Installation Instructions contdFilling the Water Heater WiringUSE with Power Cord USE Without Power CordVent pipe from the water heater must be I/4 inch per USE Without Power Cord contdWiring Diagram VentingPVC Schedule 40 Vent Piping Venting System Example Installations For ALL ModelsVenting contd HillPrecautions Venting System Example Installations for ALL Models contdScEw Connecting PVC, ABS or Cpvc Pipe Vent to BlowerInstallation Showing USE of PVC, ABS or Cpvc Pipe Sediment Trap GAS Piping with Flexible ConnectorGas Piping He appliance and its gas connection must be leak testedModel Rating Plate Installation ChecklistTemperature Before Lighting the PilotBefore the Water Heater will Operate Operating InstructionsBefore Lighting Propane L,P. GAS Water LightingTHERMOCOUPLEP,LOTBURNER Operating Instructions contdWhatto Doif Yousmellgas Temperature Regulation Service and Adjustment Draining Service and Adjustment contdGas Control Valve & Burner Assembly Replacement Information Temperature-Pressure ReliefWasher Drain Valve Washer ReplacementService HousekeepingThermal Expansion Troubleshooting GuideStart Up Conditions Smelly Water Troubleshooting Guide contdCondensation SMOKE/ODORNot Enough or no HOT Water High Temperature Shut OFF SystemOperational Conditions contd AIR in HOT Water FaucetsLeakage Checkpoints Troubleshooting Guide contdIwarningi Thermostat and GAS Supply CheckSwc...,c Diagram for Electrical System Check on pages 34Electrical System Check Use diagram on Thec#togrouod/r110,I-.- Isindicator,20 o,tshtooI Model Numbers Parts Order List153.335816 40 Gal Parts Order List contdParts Order List Power Miser TM 9 Power Vent GAS Water HeatersParts Order List contd Power Miser TM 9 Power Vent GAS Water Heaters Model NumbersAbout Your Warranty Warranty
Related manuals
Manual 40 pages 985 b

153.335862, 153.335942, 153.335916, 153.335962, 153.335845 specifications

The Kenmore 153 series, comprising models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, is renowned for its innovative design and exceptional performance in household appliances. These models are predominantly known for their washing machines and dryers, which have become staples in modern homes.

One of the standout features of the Kenmore 153 series is its advanced wash technology. Each model incorporates a high-efficiency system designed to reduce water consumption while maximizing cleaning power. The patented triple-action agitator ensures thorough cleaning by moving clothes in multiple directions, providing better agitation and fabric care. This technology not only ensures a deeper clean but also helps in preserving the integrity of fabrics over time.

Energy efficiency is another hallmark of the Kenmore 153 series. Many models are ENERGY STAR certified, which means they meet stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy. This leads to significant cost savings over time, making them a smart choice for eco-conscious consumers looking to reduce their environmental footprint.

The Kenmore 153 series also emphasizes user-friendly features. With intuitive control panels and easy-to-read displays, these machines make laundry tasks simpler. Some models include a variety of customizable wash cycles, allowing users to select the optimal settings for different types of fabrics and soil levels. The quick wash and dryer cycles are particularly beneficial for those with busy lifestyles, reducing the time spent on laundry.

Noise reduction technology is another advantage. The Kenmore 153 series is designed with sound-dampening materials and features that minimize operational noise, making them ideal for homes where quiet is preferred, such as during nighttime laundry routines.

In terms of build quality, these models are constructed with durable materials aimed at longevity and reliability. Users can expect years of dependable service, with many designs offering warranties to back their durability claims.

In conclusion, the Kenmore 153 series, including models 153.335916, 153.335942, 153.335962, 153.335845, and 153.335862, encapsulates a blend of advanced laundry technologies, energy efficiency, user-friendly features, and robust build quality. These attributes make them a valuable addition to any household, simplifying the laundry process while delivering excellent results.
Top Page Image Contents