Review this chart to find
_r | cleaning the unit. |
Cleaner won'trun.
Poor Job of dirt
1.Unplugged at wall outlet.
2.Tripped circuitbreaker/blown fuse at household service panel.
3, On/off switch not turned on.
1, Full or clogged dust bag
2.Wrong pile height setting,
3.Worn brush,
4o Clogged nozzle or dirt tube,
5.Clogged hose.
6.Hole in hose.
7.Broken/misplaced belt.
8.Hose not Inserted fully
9.Motor protection system activated.
I0, Dlrty filters_
Io Plug in firmly, push on/off switch to
On.
2o Reset circuit breaker or replace fuse.
3.Push on/off switch to om
IIChange bsg, (page 13).
2. Adjust setting, (page 8).
3, Replace brush, (page 21)o
4.Clean nozzle area, (page 19).
5, Check for clogs, (page 19).
6.Replacshose,
7.Replace/f'Lbelt,(page17),
8.Insert hose fully, (page 9).
9.Check for ciogs, (page 19).
tO, Clean filters, (page 14),
Cleaner picks upI. Wrong pile height setting. moveable rugs or
pushes too hard.
1, Adjust setting, (page 7)°
Light won'twork.
Agitator does not turn.
Performance Indicator, some models, Is red.
1.Burned out light bulb.
1.Broken belt.
2.Bare floor selector in bare floor setting.
3.Belt installed incorrectly.
I.Full or clogged dust bag°
2.Dirty filters.
3.Clogged airflow passage - dirt tube, nozzle, hose,
4.Certain attachment toots,
1. Change fightbulb, (page 20).
1.Replace belt, (page 16)o
2.Switch selector to the carpet setting, (page 7),
3.Check BELT CHANGING AND BRUSH CLEANING, (page 17).
1.Change bag, (page 13)o
2.Clean filters, (page 14).
3.Clear clog from airflow passage. (page 19).
4.Should return to normal when tool is removed.
Air flow restricted | 1. | Attachment | use restricts | |
with attachment usa. |
| air flow. |
| |
Sound changes. | 2. | New carpet fuzz clogged air path° | ||
Excessive | noise as | 1. | Bert rubbing | on carpet/bare floor |
vacuum Is | shut off. |
| selector shaft° |
1.Check ATTACHMENTS. (page 8).
2.Check CLOG REMOVAL and clean hose, (page 19)o
1.Push selector all the way forward.
22