Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand.
Handle
Release Pedal
HANDLE MOUNTED
SOME MODELS
To start the vacuum
cleaner, slide the On!Off switch from
the OFF position to the ON position. To
stop the vacuum cleaner, slide the On/Off switch to
the OFF position.
Crevice
Tool....
Telescoping
DustingStretch
Hose
UpholsteryHose
Collar
Identify each of the attachments shown above.
TO USE ATTACHMENTS:
Place the bare floor selector in the bare floor setting by rotating the selector back and down to the bare floor setting° See
CARPET/BARE FLOOR SELECTOR section.
BODY MOUNTED
SOME MODELS
To start the vacuum cleaner, put the On/Off switch on the top of the body in the ON position. To stop the cleaner, put
theswitchOn/Offin |
|
| i' |
| I | ||
position. |
|
|
|
the OFF |
|
|
|
I | _ | Handle |
When returning the bare floor selector to the carpet setting, use caution as the selector can move quickly to that setting due to tension created by the belt.
Remove the lower end of the stretch hose from the cleaner by grasping the hose collar, twisting and pulling straight out.
NOTE: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow by the attachments themselves or by new carpet fuzz filling the bag quickly. See the TROUBLESHOOTING section.
WARNING
Electrical Shock And Personal
Injury Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure to do so could result in
electrical shock or personal Injury from cleaner suddenly starting.