Kenmore 116.3181 manual Pile Height Selection and Setting, Suggested Pile Height Settings

PILE HEIGHT SELECTION AND SETTING

To select a pile height setting:
Select a pile height setting by pressing
the HEIGHT ADJUST pedal on the side of
the nozzle_ The pile height setting shows
on the indicator	window_ See SUGGESTED	EIGHT
PILE HEIGHT SETTINGS.		ADJUST
		Pedal
Attention: Refer to your carpet		color
		Window
manufacturers	cleaning
recommendations.	Some more delicate
carpets may require that they be
vacuumed with the agitator turned off to
prevent carpet	damage°

SUGGESTED PILE HEIGHT SETTINGS

There are four (4) pile height settings on the vacuum cleanen l:or best deep down cleaning, use the XLO setting, However, you may need to rals_ the helght to make some jobs easier, such as scatter rugs and some deep pile carpets, and to prevent the vacuum cleaner from shutting off.

Suggested settings are:

HI - Shag, deep pite, or scatter rugs_

MED - Medium to deep pile.

LO - Low to medium pile_

XLO - Most carpets, bare floors, and delicate carpets that require agitator to be turned off.

CHECK BAG INDICATOR

When the vacuum cleaner _srunning with normal air flow, the light on the CHECK

BAG indicator Is off. The light comes on whenever the airflow becomes blocked_ If

that occurs, check the d_sposable dust bag,

motor safety filter and other possible ctog locations shown in CLOG REMOVAL.

NOTE: It is normal for the CHECK BAG

indicator to come on when using certain attachments, due to reduced airflow

through attachment=, No maintenance is required°