Cisco Systems 4300E manual Powering the IP Camera On or Off, Resetting the IP Camera

Page 23

Chapter 2 Getting Started

Powering the IP Camera On or Off

Powering the IP Camera On or Off

The IP camera does not include an on/off switch. You power it on or off by connecting it to or disconnecting it from a power source. When you power off the IP camera, configuration settings are retained.

To power on the IP camera, take either of these actions:

•Use an STP (shielded twisted pair) Category 5 or higher network cable to connect the IP camera to a network switch that provides 802.3af compliant PoE

•Use an optional 12 VDC or 24VAC power adapter to connect the IP camera to a wall outlet

To power off the IP camera, take either of these actions:

•If the IP camera is receiving PoE, disconnect the network cable

•If the IP camera is receiving power through the power adapter, unplug the adapter from the wall or disconnect it from the camera

Resetting the IP Camera

You reset the IP camera by pressing the Reset button on the rear of the device (see Figure 1-3 on page 1-5). There are various reset types, as described in Table 2-4.

You also can also perform these reset operations from the Maintenance Settings window as described in the “Maintenance Settings Window” section on page 3-31.

Table 2-4

Resetting the IP Camera

 

 

 

 

 

Reset Type

 

Procedure

Remarks

 

 

 

 

Reboot.

 

Press and immediately release

This action is equivalent to

 

 

the Reset button.

powering the IP camera down

 

 

 

and then powering it up. Settings

 

 

 

that are configured for the IP

 

 

 

camera are retained.

 

 

 

 

Factory reset.

 

Press and hold the button for at

Sets all IP camera options to

 

 

least 15 seconds.

their default values. After you

 

 

 

perform this procedure, follow

 

 

 

the steps in the “Performing the

 

 

 

Initial Setup of the IP Camera”

 

 

 

section on page 2-5.

 

 

 

 

Managing the Local Storage

The 4000E Series IP cameras have a USB port that can support an optional USB flash drive (up to 8 GB) for local storage purposes. If local storage is available on an IP camera and the camera loses network connectivity, video data storage switches to the local USB flash drive.

For security purposes, video data stored on the USB flash drive is encrypted. To view the encrypted video, you must decrypt it to H.264 format. Encrypted files cannot be decrypted directly from a USB flash drive on an IP camera; before they can be decrypted, they must either be downloaded to your PC, or the USB flash drive must be moved from the IP camera to your PC.

 

 

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

 

 

 

 

 

 

OL-25230-02

 

 

2-11

 

 

 

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Text Part Number OL-25230-02 Americas HeadquartersCopyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Organization OverviewOL-25230-02 Overview IP Camera FeaturesOverview IP Camera Features IP Camera Physical Details Adjusting Back Focus on the IP Camera section onRear of IP Camera Side of IP Camera Described in the Resetting the IP Camera section onPackage Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the IP CameraAction Explanation Action Explanation OL-25230-02 Before you Begin Performing the Initial Setup of the IP CameraProcedure Protocol//ipaddress Accessing the IP CameraHttp//203.70.212.521024 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.52Link Description Understanding the IP Camera User InterfaceIP Camera Window Links Network Status IP Camera WindowsField Description General InformationChannel 1 and Channel Adjusting Back Focus on the IP CameraManaging the Local Storage Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksClick the Video Surveillance IP Camera Utility link Formatting the USB Flash DriveWhat to Do Next Downloading Encrypted Video Files from the USB Flash DriveDeleting Encrypted Video Files from the USB Flash Drive Click Format USBDecrypting Encrypted Video Files Accessing Navigating the Configuration Windows Configuring and Managing the IP CameraSnmp Feature Setup WindowsStreaming Streaming Settings WindowResolution Primary fps Secondary fps Current Channel Area Streaming Setup AreaOption Description Video Area Audio Area Camera Settings WindowAnalog Video Area Day Night Filter Area Video Adjustments AreaMicrophone Area Described in , Viewing Live VideoText Overlay Area Video Overlay Settings WindowVideo Overlay Output Ports IO Ports Settings WindowInput Ports Area Pan/Tilt Area Pan Tilt Settings WindowRS-232 Settings Event Notification Window Event Triggering Area Clear All button Event Scheduling AreaUndo Set All buttonEmail Notification Area FTP Notification Area Patrol Sequence Window Patrol Sequence Area Analytics Windows Network Setup WindowsBasic Settings Window Basic Device Operations Area Basic Settings AreaIP Addressing Window IP Addressing Area Time Settings WindowClone PC Time button Set Time Mode AreaYou click Save Settings Local Time AreaShow Neighbors button Discovery Settings WindowNTP Server Settings Area Cisco Discovery Protocol CDP AreaSnmp v3 Area Snmp Settings WindowSnmp v2c Area 8000000901IPv4addresshex 802.1x Settings Window EAP-FAST Configuration Options IP Filter Settings WindowEAP-PEAP Configuration Options Filter Entries Area QoS Settings WindowClass of Service CoS Area IP Filter AreaAccount Initialization Window Administration WindowsDifferentiated Services DiffServ Area SSH Administrator Accounts AreaAccess Protocols Area User List Area User Settings WindowDelete button Maintenance Settings WindowChange button Device Configuration Area Factory Default Area Restore buttonReset button Reboot Area Reboot buttonDevice Information Area Firmware Settings WindowAddressing Window section on Details button Firmware Maintenance AreaUpgrade button Device Processes WindowLog Windows Password Complexity WindowLog Setup Settings Window, Local Log Window, Syslog Settings Area Log Setup Settings WindowLocal Log Settings Area Option Description Log messages, see -25 on Local Log WindowLog List Area Codeclost AuthenticationfailedAuthorizationfailed Explanation SeverityConfiguploaded ConfigsavefailedConfigsaved ConfiguploadfailedOutputtworeset InputtworesetLogin OutputoneresetServerlost TimedstswitchTimeregswitch ServercontactedVideo controls Control DescriptionVideo image controls Streaming Settings Window section onMirror button Image tools Hotspot Zoom buttonHotspot Pan/Tilt Save Snapshot buttonAudio controls Full Screen buttonPreset button Presets controlsSet Current Preset as Add Preset PositionMotion detection Pan/tilt speed controlsMotion detection controls Enable Motion Detection check box Full Screen check Save Settings buttonTroubleshooting Troubleshooting Numerics IN-2 Https HttpLED See also videoIN-5 IN-6 IN-7 IN-8
Related manuals
Manual 86 pages 63.52 Kb

4300E specifications

The Cisco Systems 4300E Series is an advanced integrated service router designed to deliver high-performance, scalable, and secure networking solutions for enterprises. This versatile platform caters to a wide range of applications while ensuring reliability and flexibility in dynamic environments.

One of the standout features of the Cisco 4300E is its modular architecture, which allows organizations to tailor the router to their specific needs by adding or changing modules. This modularity is crucial for enterprises that require agility to adapt to evolving network demands. The router supports various network interface modules (NIMs), service modules (SMs), and high-speed WAN interface cards (HWICs), enabling seamless integration of various interfaces and features.

The Cisco 4300E is designed with performance in mind, capable of delivering high throughput and low latency, which is essential for applications such as voice, video, and data traffic. It supports robust performance with the capability of handling up to 2 Gbps of throughput, making it suitable for mid-sized to large enterprise branch offices.

Another key technology associated with the 4300E is Cisco’s Unified Communications and Collaboration suite. This integration facilitates voice, video, and messaging services across the network, ensuring efficient communication within organizations. Security features include advanced threat protection through Cisco’s integrated security services, such as firewall capabilities, VPN support, and intrusion prevention, ensuring that sensitive data remains secure.

The Cisco 4300E also supports Cisco’s DNA (Digital Network Architecture) capabilities, allowing for automation, analytics, and enhanced network visibility. This integration empowers network administrators to manage their infrastructure proactively, ensuring optimal performance and quick resolution of issues.

Additionally, the router is equipped with enhanced Quality of Service (QoS) capabilities, enabling prioritization of critical applications and traffic types. This feature is vital for maintaining high performance across diverse application requirements.

In conclusion, the Cisco 4300E Series routers stand out for their modular architecture, high performance, integrated security, and support for advanced networking technologies. These characteristics make them ideal for enterprises seeking a robust, flexible, and secure solution to meet their networking needs in an ever-evolving digital landscape. With the ability to seamlessly integrate various services and applications, the 4300E is a reliable choice for any organization looking to future-proof its network infrastructure.
Top Page Image Contents