Cisco Systems 4300E manual IP Addressing Window, Basic Settings Area, Basic Device Operations Area

Chapter 3 Configuring and Managing the IP Camera

Network Setup Windows

Table 3-9describes the options in the Basic Settings window.

Table 3-9 Basic Settings Window Options

Option	Description
Basic Settings Area
ID	Enter a unique identification for the IP camera, which is used to identify the
	IP camera to various external applications.
	The ID can contain up to 64 numbers.
Name	Enter a name for the IP camera. This name appears in the IP camera log file
	for information that is associated with this IP camera.
	The name can contain up to 64 characters, which can include letters,
	numbers, spaces, and these characters: ! $ % ( ) + , - . / = @ ^ _ ` { } ~. Cisco
	recommends that you give each IP camera a unique name so that you can
	identify it easily.
Description	Enter a description of the IP camera. For example, enter the IP camera
	location, such as “North Entrance Camera 1.”
	The description can contain up to 128 characters, which can include letters,
	numbers, spaces, and these characters: ! $ % ( ) + , - . / = @ ^ _ ` { } ~
Location	Enter the physical location of the IP camera, such as “North Entrance.”
	The location can contain up to 64 characters, which can include letters,
	numbers, spaces, and these characters: ! $ % ( ) + , - . / = @ ^ _ ` { } ~
Contact	Enter system contact information for someone such as the system
	administrator. For example, enter the e-mail address of the system
	administrator.
	The contact can contain up to 64 characters, which can include letters,
	numbers, spaces, and these characters: ! $ % ( ) + , - . / = @ ^ _ ` { } ~

Basic Device Operations Area

Enable Power LED

Check this check box if you want the Power LED on the back of the IP camera to light.

If you do not check this check box, this LED does not light.

IP Addressing Window

The IP Addressing window provides options for configuring the IP address of the IP camera.

To display the IP Addressing window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Network Setup, then click IP Addressing.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

	Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02		3-19