Cisco Systems 4300E manual Option Description, Current Channel Area, Streaming Setup Area

Page 30

Chapter 3 Configuring and Managing the IP Camera

Feature Setup Windows

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-2describes the options in the Streaming Settings window.

Table 3-2 Streaming Settings Window Options

Option

Description

 

 

Current Channel Area

 

 

 

Channel

Choose the video stream (Channel 1 or Channel 2) to which the

 

configuration settings in the Streaming Settings window apply. Channel 1 is

 

the primary stream and Channel 2 is the secondary stream.

 

 

Enable Channel

Check this check box to cause the IP camera to send audio/video data on the

 

selected stream.

 

Note Channel 2 can be enabled only if Channel 1 is set to a video

 

resolution lower than 1920 x 1080.

 

 

Channel Name

Name of the video stream.

 

The name can contain up to 16 characters, which can be letters, numbers, and

 

special characters, but no spaces. Special characters are: ! % ( ) + , - : = @ _ ~

 

 

Streaming Setup Area

 

Note Each video stream uses its own set of streaming options. The settings shown in the Streaming Setup Area apply to the currently selected stream only.

Enable SRTP

Check this check box to enable Secure Real-time Transport Protocol (SRTP),

 

which provides encryption for the audio/video stream from the IP camera.

 

 

RTSP Port

Transmission Control Protocol (TCP) port on which the IP camera receives

 

Real-Time Streaming Protocol (RTSP) commands. You must configure this

 

port if you want to allow third-party devices or software to access video

 

streams from the IP camera.

 

RTSP is a standard for connecting a client to control streaming data over the

 

web.

 

Valid values are 554 and 1024 through 65535. The default port is 554.

 

 

Video Source Port

Universal Datagram Protocol (UDP) port on which the IP camera transmits

 

Video Real-Time Transport Protocol (RTP) data.

 

Valid values are even numbers 1024 through 65534. The default port is 1024.

 

 

Audio Source Port

UDP port on which the IP camera transmits audio RTP data

 

Valid values even numbers 1024 through 65534. The default value is 1026.

 

 

Max RTP Packet Size

Maximum number of bytes per data packets that are sent in each RTP

 

request.

 

Configure a lower number if you are streaming video to a cell phone that

 

requires smaller data packets.

 

Valid values are 400 through 1400. The default value is 1400.

 

 

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

3-4

OL-25230-02

 

 

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Americas Headquarters Text Part Number OL-25230-02Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview OrganizationOL-25230-02 IP Camera Features OverviewOverview IP Camera Features Adjusting Back Focus on the IP Camera section on IP Camera Physical DetailsRear of IP Camera Described in the Resetting the IP Camera section on Side of IP CameraDC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation OL-25230-02 Performing the Initial Setup of the IP Camera ProcedureBefore you Begin Accessing the IP Camera Protocol//ipaddressHttp//203.70.212.52 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.521024Understanding the IP Camera User Interface IP Camera Window LinksLink Description General Information IP Camera WindowsField Description Network StatusAdjusting Back Focus on the IP Camera Channel 1 and ChannelReset Type Procedure Remarks Powering the IP Camera On or OffResetting the IP Camera Managing the Local StorageFormatting the USB Flash Drive Click the Video Surveillance IP Camera Utility linkClick Format USB Downloading Encrypted Video Files from the USB Flash DriveDeleting Encrypted Video Files from the USB Flash Drive What to Do NextDecrypting Encrypted Video Files Configuring and Managing the IP Camera Accessing Navigating the Configuration WindowsFeature Setup Windows SnmpStreaming Settings Window Resolution Primary fps Secondary fpsStreaming Streaming Setup Area Option DescriptionCurrent Channel Area Video Area Camera Settings Window Analog Video AreaAudio Area Described in , Viewing Live Video Video Adjustments AreaMicrophone Area Day Night Filter AreaVideo Overlay Settings Window Video OverlayText Overlay Area IO Ports Settings Window Input Ports AreaOutput Ports Pan Tilt Settings Window RS-232 SettingsPan/Tilt Area Event Notification Window Event Triggering Area Set All button Event Scheduling AreaUndo Clear All buttonEmail Notification Area FTP Notification Area Patrol Sequence Window Patrol Sequence Area Network Setup Windows Basic Settings WindowAnalytics Windows Basic Settings Area IP Addressing WindowBasic Device Operations Area Time Settings Window IP Addressing AreaLocal Time Area Set Time Mode AreaYou click Save Settings Clone PC Time buttonCisco Discovery Protocol CDP Area Discovery Settings WindowNTP Server Settings Area Show Neighbors buttonSnmp Settings Window Snmp v2c AreaSnmp v3 Area 8000000901IPv4addresshex 802.1x Settings Window IP Filter Settings Window EAP-PEAP Configuration OptionsEAP-FAST Configuration Options IP Filter Area QoS Settings WindowClass of Service CoS Area Filter Entries AreaAdministration Windows Differentiated Services DiffServ AreaAccount Initialization Window Administrator Accounts Area Access Protocols AreaSSH User Settings Window User List AreaMaintenance Settings Window Change buttonDelete button Reboot Area Reboot button Factory Default Area Restore buttonReset button Device Configuration AreaFirmware Settings Window Addressing Window section onDevice Information Area Device Processes Window Firmware Maintenance AreaUpgrade button Details buttonPassword Complexity Window Log Setup Settings Window, Local Log Window,Log Windows Log Setup Settings Window Local Log Settings AreaSyslog Settings Area Option Description Local Log Window Log List AreaLog messages, see -25 on Explanation Severity AuthenticationfailedAuthorizationfailed CodeclostConfiguploadfailed ConfigsavefailedConfigsaved ConfiguploadedOutputonereset InputtworesetLogin OutputtworesetServercontacted TimedstswitchTimeregswitch ServerlostControl Description Video controlsStreaming Settings Window section on Video image controlsSave Snapshot button Image tools Hotspot Zoom buttonHotspot Pan/Tilt Mirror buttonFull Screen button Audio controlsAdd Preset Position Presets controlsSet Current Preset as Preset buttonPan/tilt speed controls Motion detectionMotion detection controls Enable Motion Detection check box Save Settings button Full Screen checkTroubleshooting Troubleshooting Numerics IN-2 Http HttpsSee also video LEDIN-5 IN-6 IN-7 IN-8
Related manuals
Manual 86 pages 63.52 Kb

4300E specifications

The Cisco Systems 4300E Series is an advanced integrated service router designed to deliver high-performance, scalable, and secure networking solutions for enterprises. This versatile platform caters to a wide range of applications while ensuring reliability and flexibility in dynamic environments.

One of the standout features of the Cisco 4300E is its modular architecture, which allows organizations to tailor the router to their specific needs by adding or changing modules. This modularity is crucial for enterprises that require agility to adapt to evolving network demands. The router supports various network interface modules (NIMs), service modules (SMs), and high-speed WAN interface cards (HWICs), enabling seamless integration of various interfaces and features.

The Cisco 4300E is designed with performance in mind, capable of delivering high throughput and low latency, which is essential for applications such as voice, video, and data traffic. It supports robust performance with the capability of handling up to 2 Gbps of throughput, making it suitable for mid-sized to large enterprise branch offices.

Another key technology associated with the 4300E is Cisco’s Unified Communications and Collaboration suite. This integration facilitates voice, video, and messaging services across the network, ensuring efficient communication within organizations. Security features include advanced threat protection through Cisco’s integrated security services, such as firewall capabilities, VPN support, and intrusion prevention, ensuring that sensitive data remains secure.

The Cisco 4300E also supports Cisco’s DNA (Digital Network Architecture) capabilities, allowing for automation, analytics, and enhanced network visibility. This integration empowers network administrators to manage their infrastructure proactively, ensuring optimal performance and quick resolution of issues.

Additionally, the router is equipped with enhanced Quality of Service (QoS) capabilities, enabling prioritization of critical applications and traffic types. This feature is vital for maintaining high performance across diverse application requirements.

In conclusion, the Cisco 4300E Series routers stand out for their modular architecture, high performance, integrated security, and support for advanced networking technologies. These characteristics make them ideal for enterprises seeking a robust, flexible, and secure solution to meet their networking needs in an ever-evolving digital landscape. With the ability to seamlessly integrate various services and applications, the 4300E is a reliable choice for any organization looking to future-proof its network infrastructure.
Top Page Image Contents