Cisco Systems 4300E manual Pan Tilt Settings Window, Pan/Tilt Area, RS-232 Settings

Page 36

Chapter 3 Configuring and Managing the IP Camera

Feature Setup Windows

Table 3-5

IO Ports Settings Window Options (continued)

 

 

 

Option

 

Description

 

 

Automatic Reset

Check this check box if you want the corresponding output port to go back

 

 

to its default state after an event occurs.

 

 

 

Duration

 

If you checked the Automatic Reset check box, enter the amount of time, in

 

 

milliseconds, that elapses before the port goes back to its default state after

 

 

an event changes it from the default state.

 

 

 

Pan Tilt Settings Window

The Pan Tilt Settings window provides options for configuring pan and tilt functions for the IP camera. These functions require that the IP camera be installed with a pan/tilt mount that supports the Pelco D protocol.

If you use a pan/tilt mount that requires RS-422 or RS-485 connections, you must connect the mount to the IP camera through a Cisco data converter (part number CIVS-KYBD22232-B).

To display the Pan Tilt Settings window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Feature Setup, then click Pan/Tilt.

If you change any options in this window, you must click the Save Settings button to save the change. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-6describes the option in the Pan Tilt Settings window.

Table 3-6 Pan Tilt Settings Window Options

Option

Description

 

 

Pan/Tilt Area

 

 

 

Pan and Tilt Enabled

Check this check box to enable pan and tilt operation for the IP camera.

 

 

Protocol

Display only. Indicates the protocol for the pan/tilt functionality.

 

 

Address

Enter the logical address of the external PTZ device.

 

To determine this address, refer to the documentation for that device.

 

 

RS-232 Settings

 

 

 

Baud Rate

Choose the Baud rate value that is configured on the device that controls the

 

pan and tilt functions of the IP camera.

 

The default setting is 4800 bps.

 

 

Data Bits

Display only. Indicates the data bits configuration for the serial port on the

 

IP camera.

 

 

Parity

Display only. Indicates the parity configuration for the serial port on the IP

 

camera.

 

 

Stop Bits

Display only. Indicates the stop bits configuration for the serial port on the

 

IP camera.

 

 

 

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

3-10

OL-25230-02

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Americas Headquarters Text Part Number OL-25230-02Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview OrganizationOL-25230-02 IP Camera Features OverviewOverview IP Camera Features Adjusting Back Focus on the IP Camera section on IP Camera Physical DetailsRear of IP Camera Described in the Resetting the IP Camera section on Side of IP CameraDC Auto Iris Lens Connector Pinouts Package ContentsInstalling the IP Camera Getting StartedAction Explanation Action Explanation OL-25230-02 Performing the Initial Setup of the IP Camera ProcedureBefore you Begin Accessing the IP Camera Protocol//ipaddressHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.52 Http//203.70.212.521024Understanding the IP Camera User Interface IP Camera Window LinksLink Description IP Camera Windows Field DescriptionGeneral Information Network StatusAdjusting Back Focus on the IP Camera Channel 1 and ChannelPowering the IP Camera On or Off Resetting the IP CameraReset Type Procedure Remarks Managing the Local StorageFormatting the USB Flash Drive Click the Video Surveillance IP Camera Utility linkDownloading Encrypted Video Files from the USB Flash Drive Deleting Encrypted Video Files from the USB Flash DriveClick Format USB What to Do NextDecrypting Encrypted Video Files Configuring and Managing the IP Camera Accessing Navigating the Configuration WindowsFeature Setup Windows SnmpStreaming Settings Window Resolution Primary fps Secondary fpsStreaming Streaming Setup Area Option DescriptionCurrent Channel Area Video Area Camera Settings Window Analog Video AreaAudio Area Video Adjustments Area Microphone AreaDescribed in , Viewing Live Video Day Night Filter AreaVideo Overlay Settings Window Video OverlayText Overlay Area IO Ports Settings Window Input Ports AreaOutput Ports Pan Tilt Settings Window RS-232 SettingsPan/Tilt Area Event Notification Window Event Triggering Area Event Scheduling Area UndoSet All button Clear All buttonEmail Notification Area FTP Notification Area Patrol Sequence Window Patrol Sequence Area Network Setup Windows Basic Settings WindowAnalytics Windows Basic Settings Area IP Addressing WindowBasic Device Operations Area Time Settings Window IP Addressing AreaSet Time Mode Area You click Save SettingsLocal Time Area Clone PC Time buttonDiscovery Settings Window NTP Server Settings AreaCisco Discovery Protocol CDP Area Show Neighbors buttonSnmp Settings Window Snmp v2c AreaSnmp v3 Area 8000000901IPv4addresshex 802.1x Settings Window IP Filter Settings Window EAP-PEAP Configuration OptionsEAP-FAST Configuration Options QoS Settings Window Class of Service CoS AreaIP Filter Area Filter Entries AreaAdministration Windows Differentiated Services DiffServ AreaAccount Initialization Window Administrator Accounts Area Access Protocols AreaSSH User Settings Window User List AreaMaintenance Settings Window Change buttonDelete button Factory Default Area Restore button Reset buttonReboot Area Reboot button Device Configuration AreaFirmware Settings Window Addressing Window section onDevice Information Area Firmware Maintenance Area Upgrade buttonDevice Processes Window Details buttonPassword Complexity Window Log Setup Settings Window, Local Log Window,Log Windows Log Setup Settings Window Local Log Settings AreaSyslog Settings Area Option Description Local Log Window Log List AreaLog messages, see -25 on Authenticationfailed AuthorizationfailedExplanation Severity CodeclostConfigsavefailed ConfigsavedConfiguploadfailed ConfiguploadedInputtworeset LoginOutputonereset OutputtworesetTimedstswitch TimeregswitchServercontacted ServerlostControl Description Video controlsStreaming Settings Window section on Video image controlsImage tools Hotspot Zoom button Hotspot Pan/TiltSave Snapshot button Mirror buttonFull Screen button Audio controlsPresets controls Set Current Preset asAdd Preset Position Preset buttonPan/tilt speed controls Motion detectionMotion detection controls Enable Motion Detection check box Save Settings button Full Screen checkTroubleshooting Troubleshooting Numerics IN-2 Http HttpsSee also video LEDIN-5 IN-6 IN-7 IN-8
Related manuals
Manual 86 pages 63.52 Kb

4300E specifications

The Cisco Systems 4300E Series is an advanced integrated service router designed to deliver high-performance, scalable, and secure networking solutions for enterprises. This versatile platform caters to a wide range of applications while ensuring reliability and flexibility in dynamic environments.

One of the standout features of the Cisco 4300E is its modular architecture, which allows organizations to tailor the router to their specific needs by adding or changing modules. This modularity is crucial for enterprises that require agility to adapt to evolving network demands. The router supports various network interface modules (NIMs), service modules (SMs), and high-speed WAN interface cards (HWICs), enabling seamless integration of various interfaces and features.

The Cisco 4300E is designed with performance in mind, capable of delivering high throughput and low latency, which is essential for applications such as voice, video, and data traffic. It supports robust performance with the capability of handling up to 2 Gbps of throughput, making it suitable for mid-sized to large enterprise branch offices.

Another key technology associated with the 4300E is Cisco’s Unified Communications and Collaboration suite. This integration facilitates voice, video, and messaging services across the network, ensuring efficient communication within organizations. Security features include advanced threat protection through Cisco’s integrated security services, such as firewall capabilities, VPN support, and intrusion prevention, ensuring that sensitive data remains secure.

The Cisco 4300E also supports Cisco’s DNA (Digital Network Architecture) capabilities, allowing for automation, analytics, and enhanced network visibility. This integration empowers network administrators to manage their infrastructure proactively, ensuring optimal performance and quick resolution of issues.

Additionally, the router is equipped with enhanced Quality of Service (QoS) capabilities, enabling prioritization of critical applications and traffic types. This feature is vital for maintaining high performance across diverse application requirements.

In conclusion, the Cisco 4300E Series routers stand out for their modular architecture, high performance, integrated security, and support for advanced networking technologies. These characteristics make them ideal for enterprises seeking a robust, flexible, and secure solution to meet their networking needs in an ever-evolving digital landscape. With the ability to seamlessly integrate various services and applications, the 4300E is a reliable choice for any organization looking to future-proof its network infrastructure.
Top Page Image Contents