Cisco Systems 4300E manual Https//192.168.0.100, Https//203.70.212.521024, Http//203.70.212.52

Page 19

Chapter 2 Getting Started

Accessing the IP Camera

•Port number, if other than the default value. Default port numbers for the IP camera are 443 for HTTPS and 80 for HTTP. The IP camera administrator can configure an HTTPS port and an HTTP port as described in the “Account Initialization Window” section on page 3-28.

•Your user name and password for the IP camera. The IP camera administrator configures user names and passwords as described in the “User Settings Window” section on page 3-30.

To access the IP camera windows, perform the following these steps.

Before you Begin

The Microsoft .NET Framework version 2.0 or later must be installed on the PC that you use to connect to the IP camera. You can download the .NET Framework from the Microsoft website.

Procedure

Step 1 Start Internet Explorer and enter the following in the address field:

protocol://ip_address:port_number

where:

•protocol is HTTPS for a secure connection or HTTP for a non-secure connection. You can use HTTP only if you configure the camera to accept non-secure HTTP connections as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5.

•ip_address is the IP address of the IP camera. The default IP address is 192.168.0.100.

•port_number is the port number that is used for HTTPS or HTTP connections to the IP camera. You do not need to enter a port number if you are connecting through the default HTTPS port 443 or the default HTTP port 80.

For example,

•Enter the following for a secure connection if the IP address is 192.168.0.100 and the HTTPS port number is 443:

https://192.168.0.100

•Enter the following for a secure connection if the IP address is 203.70.212.52 and the HTTPS port number is 1024:

https://203.70.212.52:1024

•Enter the following for a non-secure connection if the IP address is 203.70.212.52 and the HTTP port number is 80:

http://203.70.212.52

•Enter the following for a non-secure connection if the IP address is 203.70.212.52 and the HTTP port number is 1024:

http://203.70.212.52:1024

Step 2 Enter your IP camera user name and password in the Username and Password fields, then click Login.

To log in as the IP camera administrator, enter the user name admin (which is case sensitive) and the password that is configured for the administrator. To log in as a user, enter the user name and password that are configured for the user.

The Home window for the IP Camera appears.

Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide

 

OL-25230-02

2-7

 

 

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Text Part Number OL-25230-02 Americas HeadquartersCopyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Organization OverviewOL-25230-02 Overview IP Camera FeaturesOverview IP Camera Features IP Camera Physical Details Adjusting Back Focus on the IP Camera section onRear of IP Camera Side of IP Camera Described in the Resetting the IP Camera section onPackage Contents DC Auto Iris Lens Connector PinoutsGetting Started Installing the IP CameraAction Explanation Action Explanation OL-25230-02 Procedure Performing the Initial Setup of the IP CameraBefore you Begin Protocol//ipaddress Accessing the IP CameraHttp//203.70.212.521024 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.52IP Camera Window Links Understanding the IP Camera User InterfaceLink Description Network Status IP Camera WindowsField Description General InformationChannel 1 and Channel Adjusting Back Focus on the IP CameraManaging the Local Storage Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure RemarksClick the Video Surveillance IP Camera Utility link Formatting the USB Flash DriveWhat to Do Next Downloading Encrypted Video Files from the USB Flash DriveDeleting Encrypted Video Files from the USB Flash Drive Click Format USBDecrypting Encrypted Video Files Accessing Navigating the Configuration Windows Configuring and Managing the IP CameraSnmp Feature Setup WindowsResolution Primary fps Secondary fps Streaming Settings WindowStreaming Option Description Streaming Setup AreaCurrent Channel Area Video Area Analog Video Area Camera Settings WindowAudio Area Day Night Filter Area Video Adjustments AreaMicrophone Area Described in , Viewing Live VideoVideo Overlay Video Overlay Settings WindowText Overlay Area Input Ports Area IO Ports Settings WindowOutput Ports RS-232 Settings Pan Tilt Settings WindowPan/Tilt Area Event Notification Window Event Triggering Area Clear All button Event Scheduling AreaUndo Set All buttonEmail Notification Area FTP Notification Area Patrol Sequence Window Patrol Sequence Area Basic Settings Window Network Setup WindowsAnalytics Windows IP Addressing Window Basic Settings AreaBasic Device Operations Area IP Addressing Area Time Settings WindowClone PC Time button Set Time Mode AreaYou click Save Settings Local Time AreaShow Neighbors button Discovery Settings WindowNTP Server Settings Area Cisco Discovery Protocol CDP AreaSnmp v2c Area Snmp Settings WindowSnmp v3 Area 8000000901IPv4addresshex 802.1x Settings Window EAP-PEAP Configuration Options IP Filter Settings WindowEAP-FAST Configuration Options Filter Entries Area QoS Settings WindowClass of Service CoS Area IP Filter AreaDifferentiated Services DiffServ Area Administration WindowsAccount Initialization Window Access Protocols Area Administrator Accounts AreaSSH User List Area User Settings WindowChange button Maintenance Settings WindowDelete button Device Configuration Area Factory Default Area Restore buttonReset button Reboot Area Reboot buttonAddressing Window section on Firmware Settings WindowDevice Information Area Details button Firmware Maintenance AreaUpgrade button Device Processes WindowLog Setup Settings Window, Local Log Window, Password Complexity WindowLog Windows Local Log Settings Area Log Setup Settings WindowSyslog Settings Area Option Description Log List Area Local Log WindowLog messages, see -25 on Codeclost AuthenticationfailedAuthorizationfailed Explanation SeverityConfiguploaded ConfigsavefailedConfigsaved ConfiguploadfailedOutputtworeset InputtworesetLogin OutputoneresetServerlost TimedstswitchTimeregswitch ServercontactedVideo controls Control DescriptionVideo image controls Streaming Settings Window section onMirror button Image tools Hotspot Zoom buttonHotspot Pan/Tilt Save Snapshot buttonAudio controls Full Screen buttonPreset button Presets controlsSet Current Preset as Add Preset PositionMotion detection Pan/tilt speed controlsMotion detection controls Enable Motion Detection check box Full Screen check Save Settings buttonTroubleshooting Troubleshooting Numerics IN-2 Https HttpLED See also videoIN-5 IN-6 IN-7 IN-8
Related manuals
Manual 86 pages 63.52 Kb

4300E specifications

The Cisco Systems 4300E Series is an advanced integrated service router designed to deliver high-performance, scalable, and secure networking solutions for enterprises. This versatile platform caters to a wide range of applications while ensuring reliability and flexibility in dynamic environments.

One of the standout features of the Cisco 4300E is its modular architecture, which allows organizations to tailor the router to their specific needs by adding or changing modules. This modularity is crucial for enterprises that require agility to adapt to evolving network demands. The router supports various network interface modules (NIMs), service modules (SMs), and high-speed WAN interface cards (HWICs), enabling seamless integration of various interfaces and features.

The Cisco 4300E is designed with performance in mind, capable of delivering high throughput and low latency, which is essential for applications such as voice, video, and data traffic. It supports robust performance with the capability of handling up to 2 Gbps of throughput, making it suitable for mid-sized to large enterprise branch offices.

Another key technology associated with the 4300E is Cisco’s Unified Communications and Collaboration suite. This integration facilitates voice, video, and messaging services across the network, ensuring efficient communication within organizations. Security features include advanced threat protection through Cisco’s integrated security services, such as firewall capabilities, VPN support, and intrusion prevention, ensuring that sensitive data remains secure.

The Cisco 4300E also supports Cisco’s DNA (Digital Network Architecture) capabilities, allowing for automation, analytics, and enhanced network visibility. This integration empowers network administrators to manage their infrastructure proactively, ensuring optimal performance and quick resolution of issues.

Additionally, the router is equipped with enhanced Quality of Service (QoS) capabilities, enabling prioritization of critical applications and traffic types. This feature is vital for maintaining high performance across diverse application requirements.

In conclusion, the Cisco 4300E Series routers stand out for their modular architecture, high performance, integrated security, and support for advanced networking technologies. These characteristics make them ideal for enterprises seeking a robust, flexible, and secure solution to meet their networking needs in an ever-evolving digital landscape. With the ability to seamlessly integrate various services and applications, the 4300E is a reliable choice for any organization looking to future-proof its network infrastructure.
Top Page Image Contents