Cisco Systems OL-24281-01, 2900 manual Switch Setting, SW1-1 SW1-2 SW1-3 SW1-4 SW1-5

Chapter 1 Installation

Switch Settings

Table 1-3	Switch Settings for SW2 (continued)
Pelco D or Pelco P Protocol Baud Rate
Switch Number		1	2	3	4	5	6	7	8	9	10
2400 Baud (Default for D-type Control)							OFF	OFF	OFF
4800 Baud (Default for P-type Control)							ON	OFF	OFF
9600 Baud							OFF	ON	OFF
Video Cable Type
Switch Number		1	2	3	4	5	6	7	8	9	10
Coaxial Cable										OFF
Dome Termination
Switch Number		1	2	3	4	5	6	7	8	9	10
Terminated											ON
Not Terminated											OFF

Table 1-4shows SW1 switch settings for Pelco P-Type control.

Note For Coaxitron controls, SW1 is not used; set all switches to OFF. For Pelco D-type control systems, see Table 1-5 on page 1-13.

			Table 1-4	Switch Settings for SW1, Pelco P-Type Control
					Switch Setting
			Address		SW1-1	SW1-2	SW1-3	SW1-4	SW1-5
1					OFF	OFF	OFF	OFF	OFF
2					ON	OFF	OFF	OFF	OFF
3					OFF	ON	OFF	OFF	OFF
4					ON	ON	OFF	OFF	OFF
5					OFF	OFF	ON	OFF	OFF
6					ON	OFF	ON	OFF	OFF
7					OFF	ON	ON	OFF	OFF
8					ON	ON	ON	OFF	OFF
9					OFF	OFF	OFF	ON	OFF
10					ON	OFF	OFF	ON	OFF
11					OFF	ON	OFF	ON	OFF
12					ON	ON	OFF	ON	OFF
13					OFF	OFF	ON	ON	OFF
14					ON	OFF	ON	ON	OFF
15					OFF	ON	ON	ON	OFF
16					ON	ON	ON	ON	OFF
		Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
	1-12								OL-24281-01