Cisco Systems OL-24281-01, 2900 manual Adjusting the Video Properties, Presets/Patterns

Chapter 2 Operation

Camera Configuration Tab

OSD

All camera system menus can be accessed through the Web browser using the On-Screen Display (OSD) page. The viewed camera system menus are displayed in the preview pane of the Web browser. Use the keys on your keyboard to navigate through the camera system menus.

Note If OSD is enabled, the PTZ function does not work on the camera.

Presets/Patterns

Use the Preset/Patterns page to easily configure presets and patterns without accessing the camera system menus. You can configure up to 15 preset positions and up to eight patterns using the Web browser. All configured presets and patterns are stored in the built-in memory of the camera system.

See the following sections for more information:

•Adjusting the Video Properties, page 2-18

•Using On-Screen Display (OSD) to Access Camera Menus, page 2-19

•Configuring Home Preset, page 2-20

•Selecting a Configured Preset, page 2-21

•Configuring a Pattern, page 2-22

•Selecting a Configured Pattern, page 2-22

Adjusting the Video Properties

Figure 2-5 Video Properties Page

Step 1 Place your mouse pointer over the Camera Configuration tab.

Step 2 Select General from the drop-down menu.

Step 3 Move the slider to the left or right to change the following settings:

	Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
2-18	OL-24281-01