Cisco Systems 2900, OL-24281-01 manual Mechanical dome drive only

Appendix B Specifications

Table B-1	Cisco 2900 Series IP Dome Camera Specifications (continued)
Item		Specification
Fuse		1.25A
Alarm inputs		2
Auxiliary outputs		7
Mechanical (dome drive only)
Pan movement		360° continuous pan rotation
Vertical tilt		Unobstructed +2° to -92°
Manual pan/tilt speeds		• Pan—0.1° to 80°/sec manual operation, 150°/sec turbo
		• Tilt—0.1° to 40°/sec manual operation
Preset Speeds		•	Pan—400°/sec
		•	Tilt—200°/sec
Audio
Streaming		Bidirectional; full- or half-duplex
Input/output		Terminal block, analog for microphone and speaker; 600-ohm
		differential; 1 Vp-p maximum signal level
Compression		G.711 PCM 8-bit, 8 KHz mono at 64 kbit/s
Video
Video encoding		H.264 high, main, or base profile and MJPEG
Video streams		Up to 2 simultaneous streams; the second stream is variable based on
		the setup of the primary stream
Frame rate		Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5, 4, 3, 2, 1 (dependent upon
		coding, resolution, and stream configuration)
Resolutions		•	NTSC:
			–	704 x 480
			–	352 x 240
		•	PAL—704 x 576
Physical
Construction		•	Black Box—Aluminum
		•	Dome Drive—Aluminum, thermoplastic
		•	Lower Dome—Acrylic
Light attenuation		•	Smoked—f/0.5 light loss
		•	Clear—0 light loss
Cable entry		• Day/night (35X zoom) pendant—Through 1.5 inch pendant mount
		• Day/night (27X zoom) in-ceiling—0.75 inch conduit fitting
Weight		• Day/night (35X zoom) pendant—7.6 lb (3.5 kg)
		• Day/night (27X zoom) in-ceiling—5.2 lb (2.4 kg)
Color		• Day/night (35X zoom) pendant—Gray
		• Day/night (27X zoom) in-ceiling—White

Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome

OL-24281-01 B-3