Cisco Systems 2900, OL-24281-01 manual Camera Configuration Tab, Configuring Snmp, General

Chapter 2 Operation

Camera Configuration Tab

Configuring SNMP V3

Figure 2-4 SNMP V3 Settings

Step 1 Place your mouse pointer over the Network tab.

Step 2 Select V3 as the SNMP Version.

Step 3 Type the SNMP user name in the SNMP user field.

Step 4 Select the encryption algorithm for authentication from the Authentication drop-down menu: None, MD5, or SHA.

If you use authentication method MD5 or SHA, type a password in the text box to the right of the selected Authentication encryption.

Step 5 Select the privacy encryption algorithm setting from the Privacy drop-down menu: None, DES, or AES.

If you use privacy method DES or AES, type a password in the text box to the right of the selected Privacy encryption.

Step 6 Configure the address for the Trap Configuration.

The Address is the hostname or IP address of the recipient of the trap message.

Step 7 Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

Camera Configuration Tab

Use the Camera Configuration tab to configure general camera settings, access the main menu of the camera system, or configure presets and patterns using a Web browser.

General

The General Settings page allows you to easily adjust the video properties of the image without accessing the main menu of the camera system. Change the brightness, saturation, hue, or contrast of the image by moving a slider bar to the right or left. As you move the slider, you will see the changes to the image in the preview pane of the Web browser.

All changes to the image are stored in the built-in memory of the camera system.

	Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01		2-17