Cisco Systems OL-24281-01, 2900 manual Configuring Snmp V2c, Snmp V2c Settings

Chapter 2 Operation

Network Tab

Note SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one SNMP version can be active at a time.

Configuring SNMP V2c

Figure 2-3 SNMP V2c Settings

Step 1 Place your mouse pointer over the Network tab.

Step 2 Select V2c as the SNMP Version.

Step 3 Type the community name in the Community String box.

The default name for the Community String is “public.”

Step 4 Configure the Trap Configuration settings.

•Address—Type the hostname or IP address of the recipient of the trap message.

•Community String—Type the name of the community that should receive the trap message.

Step 5 Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.

	Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
2-16	OL-24281-01