Motorola MICOM-2ES/2RS/2TS ALE manual Receiving and Transmitting Calls in ALE Mode

Page 30

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

Receiving and Transmitting Calls in ALE Mode

 

 

 

 

 

The information appearing in this section updates the ALE

 

 

 

 

 

operating instructions presented in previous publications.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Therefore, if your radio set supports MIL-STD-188-141B, use only

Note

the ALE operating instructions appearing in this Supplement.

The MICOM 2 supports the following types of ALE calls in accordance with MIL-STD-188-141B:

•Individual call – call directed to a specific station.

•Net call – call directed to a net (a net is a preprogrammed group of stations).

•Group call – call directed to a group of stations.

•AllCall – call directed to all other stations simultaneously (broadcast call); can also be used as a distress call.

•AnyCall – call directed to all other stations simultaneously, usually used to detect new stations.

•Wildcard call – call simultaneously addressed to a selected group of stations within a net, with wildcards used within the address to specify the desired stations. For efficient use of wildcards, an appropriate station naming plan must be in place.

•Self call – call using the station’s own address, generally used for test purposes.

•Bidirectional call – request for updating the LQA score with another station or stations.

•Sounding call – used to build a link quality database. This database stores ongoing information on the current quality of the various channels programmed for use by your radio.

All types of calls, except for sounding calls, can also carry messages.

 

 

 

 

 

MICOM 2 also supports the MultiNet feature. When this feature is

 

 

 

 

 

enabled, it can receive and transmit ALE calls in several different

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

nets (up to 20). See details on page 12.

Note

 

During ALE calls, a link is established between the stations participating in the call. During the link state, the radio operators have various options, many of them similar to the options available in the channel mode. For a description of the link options, see pages 19 to 23.

16_________________________________________________________________________________________________

Page 29 Page 31
Image 30
Page 29 Page 31
Contents MICOM-2ES/2RS/2TS ALE Page Commercial Warranty Standard Computer Software Copyrights MICOM-2ES/2RS/2TS ALE HF-SSB Transceiver Page General Safety Precautions This radio is intended for use in occupational/controlled Radio device is not authorized for general populationConsumer or similar use Federal Communication Commission Regulations Communication Commission Regulations section Driver Safety Interference EMI if inadequately shielded, designed, orOperational Warnings Table of Contents Viii Introduction Channel CH Menu Frequency Freq Menu Prog Menu Radio Parameters Programming Prog Menu ALE Parameters Programming Selective Calling ALE Addressing MethodUse of @ Stuffing Symbol Address and Call TypesIndividual Station Address Net Addresses Group AddressesSpecial Addressing Modes Use of Wildcards Use of ? Wildcard Symbol ? ? ?Use of ? Wildcard Symbol AllCall AddressesNull Address AnyCallsSelf Addresses Inlink AddressUsing the MultiNet Feature Messages Using ALE Functions in the Channel ModeUsing the Caller Stack Quick CallTo enter the ALE mode Entering the ALE ModeEnabling the ALE Mode ALE and Rx Only or Tx Only ChannelsALE Mode Options ALE NETOperating instructions presented in previous publications Receiving and Transmitting Calls in ALE ModeInformation appearing in this section updates the ALE ALE operating instructions appearing in this SupplementReceiving a net call Receiving Calls in ALE ModeReceiving an individual call Receiving an AllCallReceiving a bidirectional handshake call Receiving an AnyCallReceiving a sounding call To answer an incoming callTo display LQA for the received call Function is not available when receiving an AllCallAbcpack Link StateRPL MORE, F1 Replacing the Current Channel While in the Link State To replace the channelTo return a call to a station registered in the stack Using the Caller StackTo view the calls in the stack AddressTo disconnect an incoming call Disconnecting CallsTo remove an address from the stack END CallingSelecting the Desired Net Transmitting Calls in ALE ModeUsing the MON F4 key To select a netCalls to an Individual Station To transmit an individual call with MultiNet OFFTo transmit an individual call with MultiNet on To transmit on a specific channel Channel mode. If the other station is in the Channel modeYour radio switches to the Channel mode for the duration Pressing Best F3 is the first scanned channel of the netData exists Quick CallContained a message To send a quick callUsing Autodial To use Autodial to send a callSending Messages To transmit an individual call with a messageAMD11 AMD Mess To send a message during a call link state Option Capabilities See Page … Other Types of CallsTo select a special call type ALLWild GRPANY SelfGL Allcall To send global AllCall using the ESC keyTo send global AllCall using the Call function Link GL AllcallTo send selective AllCall If you decide to send a Global AllCall, press Glob F3If you decide to send a global AllCall, press Glob F3 or ? Link SL Allcall Transmitting Net Calls To transmit a net callCall NET Characters. Therefore, when an address is not an exact Transmitting Group CallsExplained on page 6, each ALE word must include To transmit a group call Request is rejected and you will see for a few seconds ATTotal length of the station addresses To define or change a groupIf adding the station would cause After pressing ADD F1 you will seeDIR BU Transmitting AnyCallsDIR BUD To transmit an AnyCall Call ANYALL Ending You can press Stop F1 or ESC to abort the entire process ALL ENDING1ALL ENDING59 Link ANYTransmitting Wildcard Calls To transmit a wildcard callCall Wild AT LeastTransmitting a Self Call You can also include the self address in a group callTo send a self-call Bidirectional Handshake MICOM-2 can also be programmed to automatically initiateOptions LQA BdirTo execute a bidirectional handshake with a net Bdir NETChange the net, see Sounding To manually initiate soundingSond Sound OFF All the stations Using the Inlink FunctionDo not enable the inlink function when communicating with a Radio that does not support the full ALE capabilitiesTransmitting ALE Calls in the Channel Mode Prog To enter the ALE Programming modeMenu NET RCVYou can also edit, or prepare a new message, on-line Programming NetsDIR AMD OPT Auto StorName Memb Chan Default Values GET ErasSetting the Net Options AMD Message Configuration Directory ParametersMlqa Qcal ALE Options ConfigurationExal Alrt If the directory is full, new addresses will not be addedIlnk Bdlk MNTAMD Auto Dial ParametersStoring ALE Parameters Ilnk BdlkUsing the New Station Address Filter

MICOM-2ES/2RS/2TS ALE specifications

Motorola MICOM-2ES/2RS/2TS ALE is a sophisticated communication system designed for critical and emergency communication applications. The system is part of Motorola’s esteemed MICOM range, known for its ruggedness and reliability in challenging environments. ALE, or Automatic Link Establishment, is a crucial feature of the MICOM series, enabling efficient and automated establishment of radio links between devices, which is essential for operations where timely communication is a matter of urgency.

One of the main features of the MICOM-2 series is its robust ALE capabilities, allowing operators to automatically find the best frequency for communication based on current conditions. This dynamic frequency selection not only enhances the reliability of the communication link but also minimizes the possibility of interference from other signals, which can be critical in emergency situations.

The MICOM-2ES, 2RS, and 2TS models feature advanced digital signal processing technologies that optimize audio clarity and reception. This ensures that communication remains clear even in noisy environments, which is a pivotal factor in emergency response scenarios. With a digital signal processor onboard, the system is capable of filtering out unwanted noise and enhancing the quality of the transmitted audio.

These models support multiple modes of operation, including both simplex and duplex communications. Such versatility allows users to adapt the system to various communication needs, augmenting its effectiveness in a range of operation scenarios. Furthermore, the MICOM-2 series is compatible with various antenna configurations, enhancing the operational range and flexibility of the system.

User-friendliness is another hallmark of the MICOM-2ES/2RS/2TS ALE systems, as they feature an intuitive user interface that simplifies operation, allowing for quick and efficient communication in high-pressure situations. Emergency responders and military personnel benefit greatly from such ease of use, leading to faster response times and improved overall coordination.

Additionally, the robustness of the Motorola MICOM-2 series ensures that it can withstand extreme environmental conditions. The units are designed to operate in harsh weather and rugged terrains, making them ideal for outdoor usage in emergency or military applications. All these features combined make the Motorola MICOM-2ES/2RS/2TS ALE a reliable choice for organizations that require high-performance communication solutions in demanding conditions.
Top Page Image Contents