ADT Security Services Security Manager 2000, Security System Functions of the Touchpads, 11 Ð

Page 11

FUNCTIONS OF THE TOUCHPADS

1.DISPLAY WINDOW.

Custom English Display Touchpads: These 2-line, 32- character Liquid Crystal Display (LCD) touchpads display protection point identification, system status, and messages.

English Display Touchpads: Display protection zone ID and system status messages using pre-designated words.

2.ÊÊÊ1ÊÊÊÊ OFF KEY: Disarms burglary portion of the system, ÊÊsilences alarms and audible trouble indicators, and ÊÊclears visual display after problem's correction.

3.ÊÊÊÊ2ÊÊÊ AWAY KEY: Arms the entire burglary system, perimeter and interior.

4.ÊÊÊ3ÊÊÊÊ STAY KEY: Arms perimeter portion of burglary Êsystem only. Interior protection is not armed, allowing Êmovement within premises without causing alarm.

5.ÊÊÊ4ÊÊÊÊ This is not a Function key. Used only as a numeric key.

6. ÊÊÊ5ÊÊÊÊ TEST KEY: Tests the system and alarm sounder if ÊÊdisarmed. Refer to TESTING THE SYSTEM section for ÊÊtest procedures.

7.ÊÊÊ6ÊÊÊÊ BYPASS KEY: Removes individual protection zones Êfrom being monitored by the system.

8.ÊÊÊ7ÊÊÊÊ INSTANT KEY: Arms in manner similar to STAY Êmode, but without the entry delay feature. Entering via Êthe entry/exit door will cause an instant alarm.

9.ÊÊÊ8ÊÊÊÊ CODE KEY: Used to assign additional user codes Êfor other users of the system.

Ê1 0 . Ê ÊÊÊ9ÊÊÊÊ CHIME KEY: Turns CHIME mode on and off. When ÊÊon, the opening of windows or doors while the system ÊÊis disarmed will sound 3 beeps at the touchpad(s).

Ê 1 1 . Ê

ÊÊ✱ Ê

 

READY KEY: Used to display all open protection

 

 

 

Êzones.

Ê Ê 1 2 . Ê

 

 

ÊÊÊ#ÊÊÊÊ

KEY: This key can be used for "Quick Arming" of the

Êsystem without use of a security code (if programmed).

13.KEYS 0Ð9 : Used to enter your security code(s).

14.READY INDICATOR: (GREEN) Lit when the system is ready to be armed (no faults present). While the system is disarmed, this indicator will go on and off as protection zones are closed and opened.

15.ARMED INDICATOR: (RED) Lit when the system has been armed.

16.INTERNAL SOUNDER: The built-in sounder mimics the alarm sounder during alarms, and will also "beep" during certain system functions.

17.EMERGENCY (PANIC) KEYS: Keys A, B, and C may all have been programmed for emergency functions; however, keys A and B may have been programmed for single button arming instead. For details, see PANIC KEYS section.

18.KEY D: This key may have been programmed for single- button paging (for details, see the SINGLE-BUTTON PAGING FEATURE section).

Note: Keys ÊÊ1ÊÊÊ through ÊÊÊ3ÊÊÊ and ÊÊÊ5ÊÊÊ

through ÊÊÊ9ÊÊÊ each perform their associated companion system functions (OFF, AWAY, STAY, etc.)

when preceded by an entry of the security code (as described later).

Ð 11 Ð

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Security System About This Manual Table of Contents General Partitioned System System OverviewSystem Overview Single-Button Paging Partition ENTRY/EXIT DelaysGeneral Information Common Zone Operation ENTRY/EXIT DelaysExit Alarms About the Touchpads 10 Ð About the Touchpads11 Ð Functions of the Touchpads12 Ð English Display TouchpadCustom English Display Touchpad 13 Ð Using the Ready KeyChecking for Open Zones 14 Ð Arming Perimeter only With Entry Delay onUsing 3 Ê Stay Key 15 Ð Arming Perimeter only With Entry Delay OFFInstant Key 16 Ð Arming ALL Protection With Entry Delay onUsing 2 Ê Êaway Key Use this key when no one will be staying inside17 Ð Disarming and Silencing AlarmsUsing 1 Ê Êoff Key 18 Ð Using 6 Ê Bypass KeyBypassing Protection Zones 19 Ð Bypassing Protection ZonesTo turn Chime Mode off Chime ModeUsing 9 Ê Êchime Key To turn Chime Mode on21 Ð For Manually Activating Silent AND/OR Audible AlarmsUsing Panic Keys Panic Keys22 Ð Manually Initiating a Fire AlarmVerify this with your installer Enter Security Code then Press # + 8 + Device Number Using Device CommandsEnter Security Code then Press # + 7 + Device Number 24 Ð Paging Feature25 Ð Security CodesDuress Code Quick Arming Single-Button Security Codes 27 Ð Testing the SystemUsing the Test Key ÊEnter the security code, then press Test key28 Ð Exit Test Mode29 Ð Check and Battery DisplaysTrouble Conditions Modem Comm Trouble ConditionsCOMM. Failure System LO BATLong Rng Trbl Total Power Failure Busy-StandbyDisabled. Call for Service Immediately Open CircuitMaintaining Your System 33 Ð Maintaining Your System34 Ð Quick Guide to System Functions35 Ð Summary of AUDIBLE/VISUAL Notifications36 Ð Summary of AUDIBLE/VISIBLE Notifications37 Ð UL Notice This is a Grade a Residential System38 Ð Federal Communications Commission FCC Part 68 Statement39 Ð Avis40 Ð Limitations of this Alarm System41 Ð Limitations of this Alarm System42 Ð Limited Warranty43 Ð InstallationÀN7527-6V2Dä
Top Page Image Contents