ADT Security Services Security Manager 2000, Security System user manual Using Device Commands

	USING DEVICE COMMANDS
General	Your system may be set up so that certain lights or other devices can be turned on or off by
Information	using the device command from the touchpad. Ask your installer if this has been done in your
	system. If programmed for your system, some devices may activate automatically upon certain
	system conditions. In this case, the following commands can be used to override the device
	activation. See your installer for a full explanation of this feature.
To activate	ENTER SECURITY CODE THEN PRESS # + 7 + DEVICE NUMBER
devices								+ 7 +
		Ê Ê	Ê Ê	Ê Ê	Ê Ê	+	Ê Ê # Ê Ê		Ê Ê

ÊÊ(Security Code)

Example: Ê7Ê Ê2Ê

Ê9Ê Ê6Ê

(Device Number)

then press #, then press 7, then enter the number representing

	the device you wish to activate. See your installer for device numbers assigned for your system.
To deactivate	ENTER SECURITY CODE THEN PRESS # + 8 + DEVICE NUMBER
devices			+ 8 + Ê Ê
	Ê Ê Ê Ê Ê Ê Ê Ê +	Ê Ê # Ê Ê

ÊÊ(Security Code)

Example: Ê7Ê Ê2Ê Ê9Ê Ê6Ê

(Device Number)

then press #, then 8, then enter the number representing the

device you wish to deactivate. See your installer for device numbers assigned for your system.

Device	Description	Device	Description
1		5
2		6
3		7
4		8
	Ð 23 Ð