White Rodgers 1F97-71 manual Program Cooling Temperatures, Press

Page 29

Program Cooling Temperatures

!CAUTION

If outside temperature is below 50°F, we recommend that you remove the thermo- stat from the wall before proceeding with the following steps to program cooling temperatures. Personal injury and/or prop- erty damage could result from air condi- tioner compressor slugging. Fresh "AA" alkaline batteries (such as Energizer® brand) must be installed to perform off- wall programming. Programming away from the wall should prevent accidental compressor operation. BE SURE TO

PRESS	SYSTEM	UNTIL OFF IS DISPLAYED
	SWITCH

BEFORE REATTACHING THE THERMO- STAT TO THE SUBBASE!

1.To program cooling temperatures for the heat- ing/cooling periods you have already set, press

SYSTEM	until COOL is displayed.
SWITCH

2.Press PRGMVIEW once. The Monday heating/cool-

ing period 1 start time you programmed earlier will be displayed, along with the currently programmed COOL A, B, C, or D tempera- ture.

3.Press or to display the COOL A, B, C, or D temperature you want for Monday's heating/cooling period 1. If you want the fan to run continuously during this period, press

FAN	until PRG FAN is displayed.
SWITCH

4.Press PRGMVIEW , then press or to select Monday's COOL A, B, C, or D tempera- ture for period 2. If you want the fan to run

29

Image 29

Contents 1F97-71 About Your New Thermostat Programming Your Your NEW ThermostatsSet Current Time and Day Your NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features To set the thermostat to Auto PressTWO Hour Temperature Override Auto Changeover Switch PositionsConvertibility Press Timefwd Selected setting until you press RUN toTime. To set cooling anticipation, press Clock Too long, press Backtime to decrease the cycleProgramming Programming Your Thermostat Total Keypad Lockout Switch PositionsPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Press Clock once. The display will show Minutes only Set Current Time and DayHeating/Cooling Schedule Plan Sample After this happens, press Prgmview until you are at Select Heating and Cooling TemperaturesPress Prgmrun to resume program operation Until Heat is displayedPress View once. The display will show Press PrgmrunUntil PRG Program Heating/Cooling Times Heating TemperaturesPress Prgmview once. MON, the abbreviation for Tures, press Prgmrun Any other day see Using the HOLD/COPY ButtonBefore Reattaching the THERMO- Stat to the Subbase Program Cooling TemperaturesPress Complete until Copyhold has been pressed twice Using the HOLD/COPY ButtonBegin program operation Press Copyhold once. Copy will appear on Check Your ProgrammingTion mode you want HEAT, COOL, AUTO. Press Thermostat to subbase. Turn on power to System. Then pressPress Prgmview and Advday until you return to How can I permanently change a part of my program?This point, press RUN to start the normal Program function. See Programming Your ThermostatGramming Your Thermostat Why can’t I program the thermostat in the Auto mode?Programmed fan, press MostatAting Your Thermostat Immediately, pressThen press Thermostat beeps every few minutes. What does this mean? Display is flashing BATTERY. What does this mean?ING Your Thermostat See Operating Your Thermostat Back on, press Why is the system turning on and off so frequently seldom?Any time you wish to turn your system off Simply press Ming Your Thermostat Maintains programming, pressOFF is displayed, put the thermostat back on Wall, press Part No -5100A