White Rodgers 1F97-71 manual Back of Thermostat Body

Page 7

Other than and , the buttons are lo- cated behind the thermostat door. To open the door, use your fingernail in the indentation at the top of the door to pull it out from the top, then swing it down on its hinges.

On the following pages there are brief descriptions of the display and the thermostat buttons.

6-pin Connector

Batteries

W14
W22
(Group A)
(Group B)
Option Switches	3-pin Connector

BACK OF THERMOSTAT BODY

7

Image 7

Contents 1F97-71 About Your New Thermostat Set Current Time and Day Your NEW ThermostatsProgramming Your Your NEW THERMOSTAT’S Features Operating Your Thermostat Back of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features To set the thermostat to Auto PressTWO Hour Temperature Override Auto Changeover Switch PositionsConvertibility Press Timefwd Selected setting until you press RUN toTime. To set cooling anticipation, press Clock Too long, press Backtime to decrease the cycleProgramming Programming Your Thermostat Total Keypad Lockout Switch PositionsPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Press Clock once. The display will show Minutes only Set Current Time and DayHeating/Cooling Schedule Plan Sample Until Heat is displayed Select Heating and Cooling TemperaturesAfter this happens, press Prgmview until you are at Press Prgmrun to resume program operationPress View once. The display will show Press PrgmrunPress Prgmview once. MON, the abbreviation for Program Heating/Cooling Times Heating TemperaturesUntil PRG Tures, press Prgmrun Any other day see Using the HOLD/COPY ButtonPress Program Cooling TemperaturesBefore Reattaching the THERMO- Stat to the Subbase Begin program operation Using the HOLD/COPY ButtonComplete until Copyhold has been pressed twice Press Copyhold once. Copy will appear on Check Your ProgrammingTion mode you want HEAT, COOL, AUTO. Press Thermostat to subbase. Turn on power to System. Then pressProgram function. See Programming Your Thermostat How can I permanently change a part of my program?Press Prgmview and Advday until you return to This point, press RUN to start the normalMostat Why can’t I program the thermostat in the Auto mode?Gramming Your Thermostat Programmed fan, pressThen press Immediately, pressAting Your Thermostat ING Your Thermostat Display is flashing BATTERY. What does this mean?Thermostat beeps every few minutes. What does this mean? See Operating Your Thermostat Any time you wish to turn your system off Simply press Why is the system turning on and off so frequently seldom?Back on, press OFF is displayed, put the thermostat back on Wall, press Maintains programming, pressMing Your Thermostat Part No -5100A