White Rodgers 1F97-71 manual Thermostat to subbase. Turn on power to System. Then press

Page 32

day's programming, go back to the program- ming instructions to correct the error.

6.Press PRGMRUN .

7. Press	SYSTEM	until COOL is displayed.
	SWITCH

8.Repeat steps 2 through 5 to check cooling temperatures.

9.Press PRGMRUN to begin program operation.

YOUR THERMOSTAT IS NOW COMPLETELY PROGRAMMED AND READY TO AUTOMATI- CALLY PROVIDE MAXIMUM COMFORT AND EFFICIENCY!

NOTE

When you have completed programming, you may set option switch group A (see TOTAL KEYPAD LOCKOUT in the OPERATING FEATURES sec- tion).

Press	SYSTEM	until OFF is displayed. Reattach
	SWITCH

thermostat to subbase. Turn on power to the

system. Then press	SYSTEM	to select the opera-
	SWITCH

tion mode you want (HEAT, COOL, AUTO). Press

FAN	until FAN AUTO is displayed (automatic
SWITCH	until FAN AUTO is displayed (automatic
cycling).

32

Image 32

Contents 1F97-71 About Your New Thermostat Programming Your Your NEW ThermostatsSet Current Time and Day Your NEW THERMOSTAT’S Features Operating Your Thermostat Parts of the Thermostat Back of The Thermostat BodyBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features Press To set the thermostat to AutoAuto Changeover Switch Positions TWO Hour Temperature OverrideSelected setting until you press RUN to Convertibility Press TimefwdToo long, press Backtime to decrease the cycle Time. To set cooling anticipation, press ClockProgramming Total Keypad Lockout Switch Positions Programming Your ThermostatPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Set Current Time and Day Press Clock once. The display will show Minutes onlyHeating/Cooling Schedule Plan Sample Select Heating and Cooling Temperatures After this happens, press Prgmview until you are atPress Prgmrun to resume program operation Until Heat is displayedPress Prgmrun Press View once. The display will showUntil PRG Program Heating/Cooling Times Heating TemperaturesPress Prgmview once. MON, the abbreviation for Any other day see Using the HOLD/COPY Button Tures, press PrgmrunBefore Reattaching the THERMO- Stat to the Subbase Program Cooling TemperaturesPress Complete until Copyhold has been pressed twice Using the HOLD/COPY ButtonBegin program operation Check Your Programming Press Copyhold once. Copy will appear onThermostat to subbase. Turn on power to System. Then press Tion mode you want HEAT, COOL, AUTO. PressHow can I permanently change a part of my program? Press Prgmview and Advday until you return toThis point, press RUN to start the normal Program function. See Programming Your ThermostatWhy can’t I program the thermostat in the Auto mode? Gramming Your ThermostatProgrammed fan, press MostatAting Your Thermostat Immediately, pressThen press Thermostat beeps every few minutes. What does this mean? Display is flashing BATTERY. What does this mean?ING Your Thermostat See Operating Your Thermostat Back on, press Why is the system turning on and off so frequently seldom?Any time you wish to turn your system off Simply press Ming Your Thermostat Maintains programming, pressOFF is displayed, put the thermostat back on Wall, press Part No -5100A