White Rodgers 1F97-71 manual Display

Page 8

The Display

1Continuously displays system mode (HEAT, OFF, COOL, AUTO, HOLD). During pro- gramming, the day of the week is displayed (MON, TUE, WED, etc.).

2Alternately displays room temperature (F de- notes degrees Fahrenheit and C denotes de- grees Celsius) and time of day (A denotes AM time and P denotes PM time).

3Displays the setpoint temperature.

4In VIEW TEMP mode, A, B, C, and D are the 1st, 2nd, 3rd, and 4th heating or cooling tem- peratures available for programming.

5The word BATTERY flashes on the display when the "AA" alkaline batteries are weak and should be replaced. The word BATTERY is displayed continuously (non-flashing) when thermostat is running on battery power only.

6FAN ON is displayed when the blower is operating continuously. FAN AUTO is dis- played during automatic fan operation (when the blower cycles with the heating or cooling system).

8

Image 8

Contents 1F97-71 About Your New Thermostat Programming Your Your NEW ThermostatsSet Current Time and Day Your NEW THERMOSTAT’S Features Operating Your Thermostat Parts of the Thermostat Back of The Thermostat BodyBack of Thermostat Body Display Digital Comfort SET System Thermostat Buttons 11 12 Operating Features Press To set the thermostat to AutoAuto Changeover Switch Positions TWO Hour Temperature OverrideSelected setting until you press RUN to Convertibility Press TimefwdToo long, press Backtime to decrease the cycle Time. To set cooling anticipation, press ClockProgramming Total Keypad Lockout Switch Positions Programming Your ThermostatPlanning for Your Needs Period Time Temp Heat a Heat B Heat C Heat D Cool a Cool B Cool C Cool D Set Current Time and Day Press Clock once. The display will show Minutes onlyHeating/Cooling Schedule Plan Sample Select Heating and Cooling Temperatures After this happens, press Prgmview until you are atPress Prgmrun to resume program operation Until Heat is displayedPress Prgmrun Press View once. The display will showUntil PRG Program Heating/Cooling Times Heating TemperaturesPress Prgmview once. MON, the abbreviation for Any other day see Using the HOLD/COPY Button Tures, press PrgmrunBefore Reattaching the THERMO- Stat to the Subbase Program Cooling TemperaturesPress Complete until Copyhold has been pressed twice Using the HOLD/COPY ButtonBegin program operation Check Your Programming Press Copyhold once. Copy will appear onThermostat to subbase. Turn on power to System. Then press Tion mode you want HEAT, COOL, AUTO. PressHow can I permanently change a part of my program? Press Prgmview and Advday until you return toThis point, press RUN to start the normal Program function. See Programming Your ThermostatWhy can’t I program the thermostat in the Auto mode? Gramming Your ThermostatProgrammed fan, press MostatAting Your Thermostat Immediately, pressThen press Thermostat beeps every few minutes. What does this mean? Display is flashing BATTERY. What does this mean?ING Your Thermostat See Operating Your Thermostat Back on, press Why is the system turning on and off so frequently seldom?Any time you wish to turn your system off Simply press Ming Your Thermostat Maintains programming, pressOFF is displayed, put the thermostat back on Wall, press Part No -5100A